Petersubaru Posted January 4, 2009 Share Posted January 4, 2009 (edited) I googled "endwrench automatic transmission fluid" ...then when you get to the google page ...2nd from the top..."todays cars and trucks are highly technical marvels"...which leads to tranny,coolant etc. and motor oil recommendations like 5/30..but under severe/hot service..the rec. oil is 10w/30..or.."10w20"..I have never heard of a 10W20 except when used in racing..does anyone have any other info as to why this thinner oil is recommended Edited January 4, 2009 by Petersubaru Link to comment Share on other sites More sharing options...
Rooster2 Posted January 4, 2009 Share Posted January 4, 2009 10W-20 sounds like a "typo" error to me. I have never heard of that oil type. Both my Subies are high millage, with over 100K miles each. So, I use 10W-40in the winter, 20W-50 in the summer with no problems. Link to comment Share on other sites More sharing options...
svxpert Posted January 4, 2009 Share Posted January 4, 2009 10W-20 is used in some Honda's. i doubt subaru advises to use it in north america though. give us the link to the article. Link to comment Share on other sites More sharing options...
Petersubaru Posted January 4, 2009 Author Share Posted January 4, 2009 (edited) 10W-20 is used in some Honda's. i doubt subaru advises to use it in north america though. give us the link to the article...I don't know how to send links..but I have "re-written" my orginal post to make it hopefully easier to get too..or go to... endwrench 2006 issue..look up fluid maintenance..go with the flow Edited January 4, 2009 by Petersubaru Link to comment Share on other sites More sharing options...
johnceggleston Posted January 4, 2009 Share Posted January 4, 2009 ..I don't know how to send links.. just copy the address in the address bar at the top of the page and paste it in the dialog box like this one from the other day: http://www.aa1car.com/library/ic697.htm i considered using the address for the pictures of the wet t-shirt contest at harry's in key west. Link to comment Share on other sites More sharing options...
davebugs Posted January 4, 2009 Share Posted January 4, 2009 i considered using the address for the pictures of the wet t-shirt contest at harry's in key west. I would hope that Harry's would get more hits. I know some Honda/Acura's take a 5w20 that is a spec that's a little hard to find. I believe Ford has a 5w20 as well - but I don't own or service any Fords. An old race engine builder told me long ago to run the lightest weight possible. His theory was that with thin oil it'll get everywhere. Thicker oil may lubricate 95% of the engine better - but that last 5% is what will kill it. Once it needs rebuilt it's the labor that kills you. Says he ran straight 10 weight in his Ford pickup he'd had since new and never had an issue. This was 25 years ago or so and the truck was probably atleast 10-15 years old. Long before I recall 5w30 becoming the defacto standard to help meet fuel effeciency ratings, etc. I have a tendency to not go to thicker oils on my high mileage stuff. And run it in Subaru's no matter the mileage (5w30). In the old days over 100k meant going 10w30 or 10w40 for me. If we're not careful this will become and oil 'brand' discussion. Dave Link to comment Share on other sites More sharing options...
Petersubaru Posted January 4, 2009 Author Share Posted January 4, 2009 I would hope that Harry's would get more hits. I know some Honda/Acura's take a 5w20 that is a spec that's a little hard to find. I believe Ford has a 5w20 as well - but I don't own or service any Fords. An old race engine builder told me long ago to run the lightest weight possible. His theory was that with thin oil it'll get everywhere. Thicker oil may lubricate 95% of the engine better - but that last 5% is what will kill it. Once it needs rebuilt it's the labor that kills you. Says he ran straight 10 weight in his Ford pickup he'd had since new and never had an issue. This was 25 years ago or so and the truck was probably atleast 10-15 years old. Long before I recall 5w30 becoming the defacto standard to help meet fuel effeciency ratings, etc. I have a tendency to not go to thicker oils on my high mileage stuff. And run it in Subaru's no matter the mileage (5w30). In the old days over 100k meant going 10w30 or 10w40 for me. If we're not careful this will become and oil 'brand' discussion. Dave ..as a reminder..I am only trying to understand why the endwrench article contained the statement .."for severe..10W-20 motor oil recom." Link to comment Share on other sites More sharing options...
axel Posted January 4, 2009 Share Posted January 4, 2009 Dunno, but I kinda think that 5/20w might not offer really good protection against wear, certainly not in hot summer conditions. I use a high quality full synthetic oil...5/40 year round in my 2000 Legacy. Don't get much in the way of sub zero winters in my neck of the woods. 5/40 synthetic should work well down to zeroºtemps and maybe a bit below that, and in above 100º F summer temps 5/40 works well. Link to comment Share on other sites More sharing options...
bulwnkl Posted January 5, 2009 Share Posted January 5, 2009 "10W20" is very clearly a misprint, as there's essentially no such thing available in north america. Whether they meant 5W20, 10W30, 10W40, 5W40, or what I have no idea. Link to comment Share on other sites More sharing options...
idosubaru Posted January 5, 2009 Share Posted January 5, 2009 10W-20 isn't something i'd use, so i'll move on and ignore it. Says he ran straight 10 weight in his Ford pickup he'd had since new and never had an issue. This was 25 years ago or so and the truck was probably atleast 10-15 years old. if it was a straight 6 300 inline Ford engine then it probably would have done fine on any weight oil. those are great motors, underpowered for big work but last forever. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now