Crabman Posted January 27, 2009 Share Posted January 27, 2009 Hey All, I've been absent from the board for a while. Hope everyone is doing well. Had a really turbulent holiday season. Was laid off, then had another baby, then found work. Not much time for subaru stuff. But now that I am working again, I bought myself a present. I'm getting a high roll bar for my '79 brat. I already have the winch bumper, so all I need to complete the winch accessory package is the winch itself. Now I know that I'll probably never find an original winch, though I am trying to keep my brat as orignal as possible. I have been told that 'Superwinch' still makes the same winch that was used on the brats, its their '2000 lb ATV' winch. Can anyone confirm that this is correct?? Not only do I want it to look original, but I'd love it to be useful too. The Superwinch website says that your winch should be able to pull 1.5 times the weight of your car, so what would that be, 3750 lbs or something? Well if anyone has any info out there, like specs on the original winch, nice pictures of the original winch, actually has an original winch on their gen 1, or just any general advice and recommendations, I'd love to hear them. Nice to be back, Crabman Link to comment Share on other sites More sharing options...
bratman18 Posted January 27, 2009 Share Posted January 27, 2009 The 2000 lb one would look the closest to the original but it wouldn't have much pulling power for the Brat. But then the problem you run into is that if you want a bigger one, it is just that, Bigger! So it wouldn't look like the original. But you would probably get more usefulness out of it. Link to comment Share on other sites More sharing options...
Greenley Posted January 27, 2009 Share Posted January 27, 2009 Run a few snatch blocks with the 2k lb. winch, should be fine. I know i wouldn't have a gen 1 brat in any position where i'd have to winch out anyway. my $.0002 Link to comment Share on other sites More sharing options...
mcbrat Posted January 27, 2009 Share Posted January 27, 2009 there's a good pic here... http://www.indysworld.com/80s/brats/mags-acc/acc-gen1/gen1-acc.html what's an original worth to you ? Link to comment Share on other sites More sharing options...
carfreak85 Posted January 27, 2009 Share Posted January 27, 2009 what's an original worth to you ? Hows the condition? Link to comment Share on other sites More sharing options...
Crabman Posted January 27, 2009 Author Share Posted January 27, 2009 Yeah, as expected the superwinch "LT2000" is not a perfect match in terms of looks. Although, I suppose if you painted it yellow, it would be close enough. Thanks for the pic McBrat. I know i wouldn't have a gen 1 brat in any positionwhere i'd have to winch out anyway. LOL! Famous last words. I hope I'm never in that position either but you never know. I definitely want to do a little off-roading. But really I need the winch because whenever I go camping with S'ko, I always have to pull him out and sometimes tow him back to the highway Anyone know what kind of rating the original winch had, was it 2000lb? Thanks for the help everyone. Link to comment Share on other sites More sharing options...
4x4brat Posted January 28, 2009 Share Posted January 28, 2009 heres what i pulled of my 78 Link to comment Share on other sites More sharing options...
Crabman Posted January 28, 2009 Author Share Posted January 28, 2009 4X4Brat, that winch isn't original is it? I'm having the hardest time imagining how that might mount. As far as I can tell, the original winch, just mounted to two holes on the winch bumper. Link to comment Share on other sites More sharing options...
bheinen74 Posted January 28, 2009 Share Posted January 28, 2009 my 85 pushbar has a mount plate on it for a winch. I will someday put one on it,but need to get the clutch replaced b4 anything else goes on. Link to comment Share on other sites More sharing options...
s'ko Posted January 28, 2009 Share Posted January 28, 2009 Yeah, as expected the superwinch "LT2000" is not a perfect match in terms of looks. Although, I suppose if you painted it yellow, it would be close enough. Thanks for the pic McBrat. LOL! Famous last words. I hope I'm never in that position either but you never know. I definitely want to do a little off-roading. But really I need the winch because whenever I go camping with S'ko, I always have to pull him out and sometimes tow him back to the highway Anyone know what kind of rating the original winch had, was it 2000lb? Thanks for the help everyone. hey... that happened once... Now that I got the front axles in a shallowe angle and the stretchy rear axles, I am all set. No axles pulling me out or exploding and leaving me dead in the water. Besides, I wouldn't want to go camping with you in the future b/c now you have two little girls who will HOWL like coyotes in the middle of the night. BW Link to comment Share on other sites More sharing options...
Crabman Posted January 28, 2009 Author Share Posted January 28, 2009 Was waiting patiently for your response We're going to have to try the camping thing again now that your Brat is squared away. Link to comment Share on other sites More sharing options...
moosens Posted January 29, 2009 Share Posted January 29, 2009 Yes,it mounts to the 2 holes on the heavy duty bumper. That one shown is not the original offered in the catalog. At least not for the Gen I. Link to comment Share on other sites More sharing options...
newsoobdude Posted January 29, 2009 Share Posted January 29, 2009 Nice come back Bosco, took long enough:grin:. Link to comment Share on other sites More sharing options...
Jibs Posted February 4, 2009 Share Posted February 4, 2009 I actually have what I think is an original winch at home. (I pulled it off a gen 1 Brat at the junkyard.) I don't know if it works, I haven't tried it, but it may be for sale. Link to comment Share on other sites More sharing options...
Crabman Posted February 5, 2009 Author Share Posted February 5, 2009 Tried to PM you jibs but it looks like your mailbox is full. Got any pics of that winch?? Link to comment Share on other sites More sharing options...
elukas Posted February 5, 2009 Share Posted February 5, 2009 I actually have an original accessory winch on my '79. Somebody painted it silver at some point, but it is still yellow underneath. What I've been trying to figure out was how it was supposed to be wired. Seeing the picture in this thread leads me to believe that there was a remote control that was part of the kit. My BRAT has power cables running into the interior with a rotating switch mounted under the radio consol. I don't believe this is the correct configuration. PM me your email, and I can send you some pix if you like. Link to comment Share on other sites More sharing options...
bratman18 Posted February 5, 2009 Share Posted February 5, 2009 I actually have an original accessory winch on my '79. Somebody painted it silver at some point, but it is still yellow underneath. What I've been trying to figure out was how it was supposed to be wired. Seeing the picture in this thread leads me to believe that there was a remote control that was part of the kit. My BRAT has power cables running into the interior with a rotating switch mounted under the radio consol. I don't believe this is the correct configuration. PM me your email, and I can send you some pix if you like. If you can, post some pics on here so we can all see the "rare" factory suby winch, Right on the vehicle Link to comment Share on other sites More sharing options...
Jibs Posted February 6, 2009 Share Posted February 6, 2009 Tried to PM you jibs but it looks like your mailbox is full. Got any pics of that winch?? Yeah sorry, I have a bunch of Pm's Im saving. I'll get pics up soon. Yeah mine is the original yellow. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now