bheinen74 Posted January 29, 2009 Share Posted January 29, 2009 Would anyone be interested in helping me getting started on the clutch job for the BRAT. Who has interest? I have Saturdays and Sundays available. If this was on my legacy, i would already have it done...I can pull an engine out of one of those in an hour. Basically, I will go borrow my dads cherry picker, or his tranny jack, and start on this on a warmer day.....preparing for some warm weather sometime in Feb. I can get ALL the tools needed, just need a helping hand...thanks of course, i can provide any needed beverages, food, small town entertainment. We don't have to finish it all up, but i would at least like to get the thing separated to the point i can pull off the flywheel if it needs resurfaced. If it looks like the flywheel is okay, then maybe start to put back together (if the clutch kit i have is the right one) bh Link to comment Share on other sites More sharing options...
subiemech85 Posted January 29, 2009 Share Posted January 29, 2009 pencil in my name we can go back and forth on the favor issue Link to comment Share on other sites More sharing options...
7point62fmj Posted January 29, 2009 Share Posted January 29, 2009 (edited) I am getting off that morning for night shift.. sorry. I should still be sleeping when you start putting it together this Saturday but may be able to help in saturdays to come. keep me posted. Edited January 29, 2009 by 7point62fmj Link to comment Share on other sites More sharing options...
The Dude Abides Posted January 29, 2009 Share Posted January 29, 2009 when were u thinking Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now