renob123 Posted January 30, 2009 Share Posted January 30, 2009 After I decide on the seats to be used in my rallyx-only Brat, I'd like to figure out some kind of racing harness setup. I didn't find any threads or pics on the forums that would help. Has anyone else thought about this? What would you recommend? Thanks. Jacob Link to comment Share on other sites More sharing options...
bratman18 Posted January 30, 2009 Share Posted January 30, 2009 I would think you could easily run a bar behind the seats and weld it to the floor on each side. And then attach harnesses to that. Link to comment Share on other sites More sharing options...
subyrally Posted February 1, 2009 Share Posted February 1, 2009 ive have been trying to figure out the same thing for my brat. i am thinking that you might be able to get a harness bar for an impreza, or base one off of it. but there shouldnt be any reason that you couldnt make a harness bar to mount where the top of the stock seat belts are bolted in. then just make some anchor plates in the floor or backo of the cab area to secure the ends of the harnesses. i doubt that anything will bolt in directly in the bar, unless you get lucky and find something that is the same width inside. even then, it might still be a challenge to do so. if you come up with anything, let me know, i am in the same boat on that one. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now