msmithmmx Posted February 15, 2009 Share Posted February 15, 2009 Need a tool suggestion, under 25 bucks. I have my suspension out and figured I would reseal the axle's. I need special tool for the bands. Any suggestions? Link to comment Share on other sites More sharing options...
OB99W Posted February 15, 2009 Share Posted February 15, 2009 They can be found on eBay, and elsewhere. Google 'cv axle boot band tool' for some links. Link to comment Share on other sites More sharing options...
Gloyale Posted February 15, 2009 Share Posted February 15, 2009 Napa should have them or be able to get them Link to comment Share on other sites More sharing options...
DishMan Posted February 17, 2009 Share Posted February 17, 2009 Kragen have them for $5-10. Note: there are at least a couple of different types. I have done numerous CV boots on my Saab and Subarus, but the last joint I bought had a different type of band, and I ended up using a pair of pliers. That worked OK but was not really very satisfactory ... Link to comment Share on other sites More sharing options...
korrupt66 Posted February 19, 2009 Share Posted February 19, 2009 I need to change out a steering gear boot that I ripped when I changed the tranny. I that the same type of clamp "band"? Would a cv banding tool work? Link to comment Share on other sites More sharing options...
Gloyale Posted February 19, 2009 Share Posted February 19, 2009 I need to change out a steering gear boot that I ripped when I changed the tranny. I that the same type of clamp "band"? Would a cv banding tool work? Those are ussually held by a spring. If it is no good anymore, Zipties are you're friend Link to comment Share on other sites More sharing options...
johnceggleston Posted February 19, 2009 Share Posted February 19, 2009 I need to change out a steering gear boot that I ripped when I changed the tranny. I that the same type of clamp "band"? Would a cv banding tool work? i bought a replacement steering rack boot for a toyota from advance auto, it came with a black plastic wiretie / ziptie. i guess there isn't as much wear and tear as on an axle. Link to comment Share on other sites More sharing options...
RallyKeith Posted February 20, 2009 Share Posted February 20, 2009 I use one of these: http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=38496 Keith Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now