WJM Posted January 22, 2004 Author Share Posted January 22, 2004 *drool* Link to comment Share on other sites More sharing options...
Marnix Posted January 23, 2004 Share Posted January 23, 2004 Originally posted by Dr. RX Marnix, send them to me, I'll post them. Will take a few pics this weekend and send them to you on Monday. Did you know that all early EJ20 closed deck engines had the oil squirters for the pistons? Even the normally aspirated ones? Link to comment Share on other sites More sharing options...
WJM Posted January 23, 2004 Author Share Posted January 23, 2004 Thats awesome! Which new ones have it? Do you happen to know that? Link to comment Share on other sites More sharing options...
JonOfScio Posted January 23, 2004 Share Posted January 23, 2004 hey WJM, there was a good EJ20TT on ebay the other day. mmmmmmm.... Link to comment Share on other sites More sharing options...
Dr. RX Posted January 23, 2004 Share Posted January 23, 2004 Marnix, I had heard that before, but had also heard that only the USDM EJ22 Turbo had them. It was hard for me to think that Subaru would only do that for one series of engines. Jon, because of the position of the left turbo and the brake boost on the USDM, the twin turbo will not easily install into an EA82 series car. Not saying it can't be done, just that there would be a LOT of modification that had to be done. Link to comment Share on other sites More sharing options...
JonOfScio Posted January 23, 2004 Share Posted January 23, 2004 eh? well, still, the idea is cool. Link to comment Share on other sites More sharing options...
calebz Posted January 23, 2004 Share Posted January 23, 2004 Find yourself a RHD legacy(postal wagon) on Ebay and go for it. Link to comment Share on other sites More sharing options...
Dr. RX Posted January 26, 2004 Share Posted January 26, 2004 Marnix came through with pics. Links: Closed Deck 1 Closed Deck 2 Closed Deck Head Open Deck 1 Open Deck 2 Link to comment Share on other sites More sharing options...
WJM Posted January 27, 2004 Author Share Posted January 27, 2004 DO YOU KNOW WHAT JUST OCCURED TO ME?!?!??!?! Sorry for the excitement.... BUT....the Legacy turbo block is closed deck. So is the EA82T. It is gridded, both of them like that....unless I am remembering something completely wrong. Are the EJ20G/K/7 gridded too? And a medium cast like the EJ22 turbo block? If so...that means the EA82T engine is a medium cast. And 300 hp is realistic.....its just so detuned it not even funny. Link to comment Share on other sites More sharing options...
Marnix Posted January 27, 2004 Share Posted January 27, 2004 I believe that materials are the same for all engines. The EJ22 normally aspirated and I believe also the open deck EJ20G/K/5 are alle non-gridded. I wouldn't know about the EJ20H/R/7/9. But sofar, the gridded / non-gridded castings show the difference between closed deck and open deck. I think this stands as long as nobody proves this theory wrong. Link to comment Share on other sites More sharing options...
LegacyT Posted January 27, 2004 Share Posted January 27, 2004 The Legacy turbo shortblock also used a different aluminium from all other subaru engines. Its a much denser high silica aluminum, the more you learn about the EJ22T the greater the gem it becomes. Mark, Link to comment Share on other sites More sharing options...
WJM Posted January 27, 2004 Author Share Posted January 27, 2004 Same AL, just a different way of making the block. High pressure cast for most everything else...means it got air bubbles in it and its no so strong. Medium pressure means there are no bubbles, and its stronger....but it takes a better cooling system to take the heat away from the block, as it hold head better. Someone hit it well on NASIOC, in a thread I read a while back.... http://forums.nasioc.com/forums/showthread.php?s=&threadid=352136&perpage=25&pagenumber=1 xephyr: 7. The T.Leg short block is made of a different aluminum than all the other open deck blocks. It is a sandcasted "medium pressure diecast aluminum crankcase...utilized to secure the higher rigidity necessary with a closed deck." (SAE technical document #890471). The open deck block "is made of high pressure die cast aluminum". High pressure casting unfortunately forces tiny little bubbles into the aluminum as it cools down, but as whole is cheaper to process by Subaru. In short, THE T.LEGACY BLOCK IS DENSER, MORE RIGID AND STRONGER THAN OPEN DECK BLOCKS. IT IS ALSO SIGNIFICANTLY MORE EXPENSIVE TO PRODUCE BY SUBARU. On the downside, because of its higher density, it retains more heat and requires more attention to cooling. Maybe its a different AL...but i think its the same, just a different process to make the block. Forged steel vs cast steel, right? Oh and I do have the SAE document he is talking of. I think i have it online as well, if anyone is interested. http://www.geocities.com/wmaham1701/other_files/subaruengines.pdf Here is a chart of most of the engines SUABRU made...I dont know who made it...Marnix maybe? (copy and paste the link) http://www.geocities.com/wmaham1701/other_files/subaruengines.jpg Have fun! Link to comment Share on other sites More sharing options...
beauregaardhooligan Posted January 27, 2004 Share Posted January 27, 2004 Them yahoos at geocity say the pages are unavailable. Link to comment Share on other sites More sharing options...
Dr. RX Posted January 27, 2004 Share Posted January 27, 2004 Ed (beauregaardhooligan), that's too funny, I left GeoCity because they got bought out by Yahoo. Link to comment Share on other sites More sharing options...
calebz Posted January 27, 2004 Share Posted January 27, 2004 try these.. copy and paste them.. If anybody cares, ask an I will explain why the others didn't work http://www.geocities.com/wmaham1701/other_files/subaruengines.jpg http://www.geocities.com/wmaham1701/other_files/subaruengines.pdf Link to comment Share on other sites More sharing options...
Dr. RX Posted January 28, 2004 Share Posted January 28, 2004 Don't know where that list of engines came from but the engine codes are not correct, look at Marnix's list, those are the correct codes. I have a copy of the paper sitting on the floor next to my computer. I have been a memeber of SAE for almost 20 years. I find it interesting that the only picture of a block in the paper is one of an open deck block (page 5). Link to comment Share on other sites More sharing options...
beauregaardhooligan Posted January 28, 2004 Share Posted January 28, 2004 Thanx, Caleb! So Subaru *did* make the Justy motor. Sorry, unHijack. Link to comment Share on other sites More sharing options...
Marnix Posted January 28, 2004 Share Posted January 28, 2004 THE T.LEGACY BLOCK IS DENSER, MORE RIGID AND STRONGER THAN OPEN DECK BLOCKS. IT IS ALSO SIGNIFICANTLY MORE EXPENSIVE TO PRODUCE BY SUBARU Now that you mention it, last night I took up both open deck and closed deck blocks (but one at a time, :-p ) and the closed deck block is *significantly* heavier, I reckon anything between 10 and 25 lbs. Too bad I don't have a scale that can take the weight of the engine, I only have a kitchen scale which I use for balancing and blueprinting pistons and connecting rods. Link to comment Share on other sites More sharing options...
WJM Posted January 28, 2004 Author Share Posted January 28, 2004 EJ20 open deck vs EJ20 closed deck? or EJ22? I am going to look at the blocks I have here, dig them out if I can, and see if there is that grid pattern. Link to comment Share on other sites More sharing options...
Marnix Posted January 30, 2004 Share Posted January 30, 2004 I compared EJ20 OD vs EJ20 CD. However, I have an EJ22 OD sitting on top of a pile of engines in my garage, and it also was non-gridded. Let me know what you find out. Yesterday I finished putting the MY90 CD DOHC heads on a rebuilt MY92 OD EJ20 block. It's almost ready and supposed to go into the Wagon once I convert it to 4WD. Now that I also have bought an engine crane for only 50$ the games can commence! Link to comment Share on other sites More sharing options...
WJM Posted January 30, 2004 Author Share Posted January 30, 2004 The EA82T block is gridded. I have the pics, just need to find a place to put them. I have yet to dig out a non turbo block to see if its gridded. Link to comment Share on other sites More sharing options...
Skip Posted January 30, 2004 Share Posted January 30, 2004 Here is a pict of the grid work on a EA82T. Where in the literature does it say that "all blocks cast with a grid work are of made using the medium cast method"? Or is this pure conjecture? Is the EA82T block open or closed deck? This is what Marnix had used to tell which was a closed deck in the first place. If it isn't closed then what is to say it isn't medium cast? Seems to me, conclusion jumping should be an Olympic event around here. How does one ascertain this feature of open/closed? Link to comment Share on other sites More sharing options...
WJM Posted January 30, 2004 Author Share Posted January 30, 2004 Exactly skip....I want to know for sure. It does look closed deck to me. Link to comment Share on other sites More sharing options...
Skip Posted January 30, 2004 Share Posted January 30, 2004 Will I am not questioning your ability to see, but what observation were you basing this statement? "It does look closed deck to me" As I will ask again How does one ascertain this feature of open/closed? Link to comment Share on other sites More sharing options...
WJM Posted January 30, 2004 Author Share Posted January 30, 2004 look at Marnix's pic for open deck, then look at the ones for closed deck. Also the grid pattern is a clue. Whether or not its a med. cast or high cast doesnt matter right now. Only SUBARU really knows what cast it is. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now