The Beast I Drive Posted March 6, 2009 Share Posted March 6, 2009 Hey yall, heres the dealio. I have a Gen 1 brat with this type pf bumper, I know its like a factory/dealer option or something, and I really like it http://www.indysworld.com/80s/general/pushbar/gen1-full.jpg BUT, someone cut the headlight gaurd hoop off mine, and I want to rebuild it. I am asking if someone who has one of these bumpers (Moosens, I know you have one :wink:) could take a couple measurements so I can rebuild mine. I need to know: -the distance to centerline of the hoop where it attaches at the sides from the end of the bumper -the distance between the centerlines of where the hoop attaches to the bumper -the distance to centerline of the hoop from the front and back of the bumper -the diameter and a guesstimate of the thickness of the wall tubing used to make the hoop maybe a pic with the dimensions marked would be the best way? Thanks in advance! Oh, this will be on a Brat of mine that will be given a restoration of sorts, with a few of the factory options like high roll bar, winch, and Jackman wheels, and cranked up a little higher than stock. It will be the one on the right as it has less major rust. Both will be revived eventually though -Bill Link to comment Share on other sites More sharing options...
moosens Posted March 6, 2009 Share Posted March 6, 2009 I'll do what I can. Wanna buy one? I have to ship a Stage I 4WD bar out your way already. Link to comment Share on other sites More sharing options...
The Beast I Drive Posted March 6, 2009 Author Share Posted March 6, 2009 How much would you be looking for? Shipping must be killer on something like that -Bill Link to comment Share on other sites More sharing options...
moosens Posted March 7, 2009 Share Posted March 7, 2009 East coast rip off price is around $150 :-\ REally though if you have to find one here then its worth the $150 for sure. To you guys ....well,I'm not so sure that's worth it since these pop up all the time out there,right? Shipping - around $60 I'm sure. Link to comment Share on other sites More sharing options...
newsoobdude Posted July 4, 2011 Share Posted July 4, 2011 I know this is an older thread but I'd like to know the answer to the question as well as add I'd like to know the size of the beam that the piece in the original question is mounted to. Anyone? AND, what does it mount to on the lower end? It looks like it uses the tow hooks or somethin' Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now