one eye Posted March 6, 2009 Share Posted March 6, 2009 So.............Today Dan and I figured we would change out the water pump since it was leaking, after getting a new water pump from Napa and cleaning the gasket very good and it is leaking down through the t-belt covers at a very good rate. It looks like it is coming out of the bottom of the water pump again, Is the any where else it could be coming from, it has a new gasket, new pump, and tight bolts and hoses................... what else could it be????? Jeff Link to comment Share on other sites More sharing options...
Caramanos2000 Posted March 6, 2009 Share Posted March 6, 2009 Check you coolant bypass hoses? Link to comment Share on other sites More sharing options...
bratsrus1 Posted March 6, 2009 Share Posted March 6, 2009 Hey Jeff This is Jerry, i am a service tech for case heavy construction and i see bran new parts be just as bad as the old part. Thanks Jerry Link to comment Share on other sites More sharing options...
nipper Posted March 6, 2009 Share Posted March 6, 2009 Where did you source the waterpump from? nipper Link to comment Share on other sites More sharing options...
one eye Posted March 6, 2009 Author Share Posted March 6, 2009 Where did you source the waterpump from?nipper Its one of those Napa brand new ones............. Jeff Link to comment Share on other sites More sharing options...
rpholz Posted March 6, 2009 Share Posted March 6, 2009 did you check the pump thouroghly before installing it? i once had a pump that when i installed it pushed more water out of it than the old one. the little holes on the top and bottom that open up when it goes bad where those closed off? Link to comment Share on other sites More sharing options...
ivantruckman Posted March 6, 2009 Share Posted March 6, 2009 What about rust holes in the solid metal pipe, o rings ? Link to comment Share on other sites More sharing options...
one eye Posted March 7, 2009 Author Share Posted March 7, 2009 The only thing we didn't check was the water pump itself, but that seems real hard to belive that it, being new, would leak the same way as the old one, I guess we'll have to dive back deep into the EA82 and see WTF. Kinda of a bummer considering where it is located...........:-\ Jeff Link to comment Share on other sites More sharing options...
ferox Posted March 7, 2009 Share Posted March 7, 2009 It might have a weep hole issue.? Link to comment Share on other sites More sharing options...
one eye Posted March 8, 2009 Author Share Posted March 8, 2009 It might have a weep hole issue.? Thats what it was on the old one but this one seems to have water running running more freely, to the ground. Jeff Link to comment Share on other sites More sharing options...
Gloyale Posted March 8, 2009 Share Posted March 8, 2009 Oring on the pipe? Or possibly leak in the bypass hose? Link to comment Share on other sites More sharing options...
one eye Posted March 9, 2009 Author Share Posted March 9, 2009 Well the battle has come to and end................ the gasket was folded over and causing it to leak mess load everywhere. The mystery is over.... it was the Gasket. Jeff Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now