The Dude Abides Posted March 8, 2009 Share Posted March 8, 2009 Ok my brother is looking into buying a 1992 Mustang LX Convertable. The Good. No rust what so ever 73 Thousand Miles Nice Paint The Bad (Long List) One Flat Tire Busted Tail Lights Busted Windshield Both Doors Hang Slightly Top is Ripped In a Couple Places. Interior Is Moldy. The story behind this is that its a 1 owner car and the Guy gives it to his kid to drive but she doesnt want a car this fast so he parks it. After a year he goes to start it up and finds the top is riped and some mold has started. So he did nothing about it and now 3 years latter hes wanting to get rid of it. It runs and shifts into gear but this interior is something else. I dont even know if you could clean it or even if you ripped the interior out would it still be in the ducts and how bad is that to clean. I personaly love mustangs like this and i think the price is decent for a running car in this shape. But looking on opinions from you guys and on the mold situation, as in if any of you have run into this before. Thanks Ben Car is 1000 bucks. Link to comment Share on other sites More sharing options...
3eyedwagon Posted March 8, 2009 Share Posted March 8, 2009 I'd like to think that us up here in Washington might know just a wee bit more than you Iowans do about mold. Simple Green will be your best friend. Unless you guys have some sort of exotic "corn mold" that I'm yet to encounter; you should be able to clean it up pretty well with a bunch of Simple Green, and alot of elbow grease. I've dealt with alot of mold from cars just sitting around in the shade over the course of one of our 9 month winters, and for the most part; almost all mold is cleanable/salvage. Unless it is to the point that the mold has actually started to rot, or degrade the cloth on the seats you should be ok. The plastic parts will all clean up pretty well, just be sure to not leave too high of a concentration of Simple Green on those parts for very long. I have seen higher concentrations of the stuff distort, and even melt some plastic interior parts. It's gonna take some time, some hard work, and in the end it probably won't be like new. However, most of the cars around here have mold damage to some extent, and we still drive them!! Link to comment Share on other sites More sharing options...
bheinen74 Posted March 8, 2009 Share Posted March 8, 2009 (edited) one thing. Iowa, Mustang, Winter. suckiest car EVER n snow flood car perhaps, from Iowa City, or Cedar Rapids? Edited March 8, 2009 by bheinen74 Link to comment Share on other sites More sharing options...
crash321 Posted March 8, 2009 Share Posted March 8, 2009 LX= 4cyl = suckyest car on the road (Sorry in advance, I hate ford):-\ Link to comment Share on other sites More sharing options...
bratman18 Posted March 8, 2009 Share Posted March 8, 2009 lx= 4cyl = suckyest car on the road (sorry in advance, i hate ford):-\ +100 Link to comment Share on other sites More sharing options...
bheinen74 Posted March 8, 2009 Share Posted March 8, 2009 +555 Link to comment Share on other sites More sharing options...
The Dude Abides Posted March 8, 2009 Author Share Posted March 8, 2009 (edited) Guys they made a 5.0 LX mustang as well, which is what this is. And he has a Daily Driver, this is just a fun car. Good to hear the mold will clean up. I still dont know if hes going this route as it needs a good amount of work. Awww and fords arent that bad. Every make has problem cars. Ill give him the simple green advise and we will go form there. As far as a flood car i cant be sure but doesnt look that route. It looks like the holes in the top made the interior wet and hot wet summers dont mix. ben Edited March 8, 2009 by The Dude Abides Link to comment Share on other sites More sharing options...
3eyedwagon Posted March 10, 2009 Share Posted March 10, 2009 He's right. LX is a interior/trim package. I had a LX 5.slow. It was a pretty sweet little car. It wasn't as fast as I'd hoped (especially off the line), but, it sure did amazing donuts on dry pavement. Link to comment Share on other sites More sharing options...
The Dude Abides Posted March 10, 2009 Author Share Posted March 10, 2009 I had a 5.0 once. I guess you could call it slow but compared to what. I had camaros that car would whop on. And i had a F150 that would of kicked its butt. With certain mods it can be a great little speed machine. Much more aftermarket for these cars. Link to comment Share on other sites More sharing options...
3eyedwagon Posted March 10, 2009 Share Posted March 10, 2009 Yeah. I'm not totally bad mouthing them. They are relevant, if not only because the aftermarket made them so. But, they do have a solid motor to build from. I was just surprised by how much people had talked them up once I got mine. In stock form it was pitifully slow, and mine was supposedly one of the better years. After a lowering kit, and a bit of suspension work my S10 solidly handed my 5.0 it's ***. This despite it being about 800-1000 pounds heavier, short two cylinders-7/10 of a liter, and having leaf spring truck suspension. That 5.0 never left me walking though, and like I said; NASCAR syled smokey donuts. :grin: Link to comment Share on other sites More sharing options...
EvilDead Posted March 10, 2009 Share Posted March 10, 2009 LX= 4cyl = suckyest car on the road (Sorry in advance, I hate ford):-\ Amen! Link to comment Share on other sites More sharing options...
hatchsub Posted March 15, 2009 Share Posted March 15, 2009 one thing. Iowa, Mustang, Winter. suckiest car EVER n snow flood car perhaps, from Iowa City, or Cedar Rapids? Camaros suck in the snow too. 5.0 convertible for 1000 bucks that runs? Id get it. Thats just me though. Link to comment Share on other sites More sharing options...
mtsmiths Posted March 20, 2009 Share Posted March 20, 2009 If I were buying an otherwise salvagable Mustang 'verte for $1,000.00, I'd just take it to a professional disaster restoration place and pay them to clean it out. They'll be able to kill any residual live mold and mildew also. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now