Uberoo Posted March 9, 2009 Share Posted March 9, 2009 Just wondering what the bolts that hold the motor mounts to the crossmember on an 84 EA81?I did a clutch job but managed to loose both of them. Quote Link to comment Share on other sites More sharing options...
baccaruda Posted March 9, 2009 Share Posted March 9, 2009 They're nuts, not bolts. They're either 12mm or 14mm (outer diameter). On an EA82 you can use the same nuts on the exhaust studs as on the motor mounts' studs and the transmission mounts' studs. They may have a lockwasher involved as well, and the nuts have a flange on the contact side as opposed to being symetrical nuts. Quote Link to comment Share on other sites More sharing options...
ivantruckman Posted March 9, 2009 Share Posted March 9, 2009 M10x1.5 i think Quote Link to comment Share on other sites More sharing options...
bratman18 Posted March 9, 2009 Share Posted March 9, 2009 (edited) The nuts are 14mm head Edited March 10, 2009 by bratman18 Quote Link to comment Share on other sites More sharing options...
Uberoo Posted March 10, 2009 Author Share Posted March 10, 2009 The nuts are M10 X1.25..just an FYI.I ended up making a ton of trips to ace hardware to sort that out.Then one of the nuts I bought turned out to be a M10X1.5.At that point I said "F*** It" and for the mean time the subaru will only have 1 nut plus the antipitch bar holding it in...At least until I get get the drive to pay .70 a nut for a damn metric nut. Quote Link to comment Share on other sites More sharing options...
bheinen74 Posted March 10, 2009 Share Posted March 10, 2009 one nut lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.