subiemech85 Posted March 18, 2009 Share Posted March 18, 2009 blower motor wiring was hacked by PO, toggle switch to turn fan ON or OFF need help with "UN-DO" TOGGLE switch wire # 1 goes to the BLACK wire TOGGLE switch wire # 2 goes to the BLUE wire '78 BRAT I figured out a solution to the cold air out center vents, DUCK TAPE the divider! the AIR CONDITIONER runs!! Link to comment Share on other sites More sharing options...
Caboobaroo Posted March 19, 2009 Share Posted March 19, 2009 Crap! I JUST packed up my '78 FSM or I could have mailed it to you to use.... Link to comment Share on other sites More sharing options...
subiemech85 Posted March 19, 2009 Author Share Posted March 19, 2009 the '77 manual isn't very helpful as it only shows a simple schematic after the connector B L RL RY B ground L power and the '79 manual is no good, gen2! someone please remove the glovebox and take a pitcture!!! Link to comment Share on other sites More sharing options...
mandelbrotx Posted March 24, 2009 Share Posted March 24, 2009 did you get it figured out? if not I can go take some pictures of my 79. No dash right now. Link to comment Share on other sites More sharing options...
subiemech85 Posted March 24, 2009 Author Share Posted March 24, 2009 pictures with descriptions!!! also while you're in there, is there a way to turn off the cold ambient air coming in through the vent ductwork? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now