ivantruckman Posted March 23, 2009 Share Posted March 23, 2009 so many subarus die in the rust belt because of "frame rust" this 86 subaru wagon was considere frame damaged. so i got it for 250 bucks. 180 thousand miles, runs great, dosnt leak much oil, has been well maintained, thisa was considerd a parts car....I refuse to let it die, the only rust is under the front frame rails. im going to attempt to make a patch pannell and use carriage bolts and body epoxy , im using 12 guage steel to fabricate the patch, thats the capacity of my brake , it seems to be thicker than the stock rail, this ia a very common spot of rust on these cars in the rust belt.. i have pics of my progress so far , which isnt much.. any comments / ideas would be much apreciated Link to comment Share on other sites More sharing options...
bratman18 Posted March 23, 2009 Share Posted March 23, 2009 I dunno about you, and I understand wanting to save a car. but time is not worth it for me to fix these rusted that badly. Spend some time, find a car from west coast, fork up the dough, ship it and be done. Ummmmmm, I'm glad you have the money to fork over for a rust free car and then the expensive shipping, but many don't!! I had to do some patching on my Brat and it was well worth it, and FREE!! Yeah it took some time but I got to learn a lot about my car and learned a lot about welding sheet metal, with a 220 mig even!! That's a challenge! But yeah, I'd love to get a car from the west coast, but until I have that much money to fork over, than I will continue to do rust repairs like the one above! Link to comment Share on other sites More sharing options...
lostbrat Posted March 24, 2009 Share Posted March 24, 2009 me tooo. grinder,cutoff tool, metal, welder and all good again. i am putting new rockers ona brat now. oh forget ill junk it and buy one from west and pay to much , then when all the rubber is cracked and paint is faded i will junk that and buy something new like all the fools with car payments, blahblahblah.fix your car and enjoy!!!! Link to comment Share on other sites More sharing options...
ivantruckman Posted March 24, 2009 Author Share Posted March 24, 2009 (edited) i do understand the time issue, it is very time consuming, but to me its relaxing, just me in the shop doing welding and fab work, alone with my thoughts and dreams. oh ya Edited March 25, 2009 by ivantruckman Link to comment Share on other sites More sharing options...
myhilo Posted March 25, 2009 Share Posted March 25, 2009 I'm looking forward to further photos, keep up the 'relaxing' work. myhilo Link to comment Share on other sites More sharing options...
Txakura Posted March 26, 2009 Share Posted March 26, 2009 i do understand the time issue, it is very time consuming, but to me its relaxing, just me in the shop doing welding and fab work, alone with my thoughts and dreams. oh ya I can relate to that, just don't have a shop to work in anymore. :-\ Link to comment Share on other sites More sharing options...
ivantruckman Posted March 26, 2009 Author Share Posted March 26, 2009 interior dismantle..dont want to catch fire inside, remove seat,carpet ,padding have to remove factory rust proofing, my buddy burned his shop to the ground welding in floor panels, went to lunch car caught fire, and tadaa, no shop Link to comment Share on other sites More sharing options...
crash321 Posted March 26, 2009 Share Posted March 26, 2009 That is a huge hole. Glad you know what your doing:) Link to comment Share on other sites More sharing options...
XT6 Magic Posted March 27, 2009 Share Posted March 27, 2009 Boy and I thought I had rust:eek: Link to comment Share on other sites More sharing options...
ivantruckman Posted March 27, 2009 Author Share Posted March 27, 2009 Boy and I thought I had rust:eek: this car isn't the worst Ive driven, i was thinking man this car isn't too bad. I'm rust belt conditioned, Iron oxide sucks Link to comment Share on other sites More sharing options...
TomRhere Posted March 28, 2009 Share Posted March 28, 2009 Aye!!! this car isn't the worst Ive driven, i was thinking man this car isn't too bad. I'm rust belt conditioned, Iron oxide sucks Link to comment Share on other sites More sharing options...
rpholz Posted March 28, 2009 Share Posted March 28, 2009 this car isn't the worst Ive driven, i was thinking man this car isn't too bad. I'm rust belt conditioned, Iron oxide sucks lol i once had a range rover with absolutely no floors except some 2x4's and plywood. i lost so much out of the floor of that truck but as stated in the begining there are people out there just toooooo broke to buy something that's 100% perfect. besides whats the fun in that? good luck man! glad to see someone taking the extra steps to keep a suby on the road! Link to comment Share on other sites More sharing options...
Davalos Posted March 28, 2009 Share Posted March 28, 2009 Yeah, mine started the Exterior rust thing this winter. HUGE difference between last year and this year. Bummer. Do they make crash-panels for these things? I pretty much rebuilt the body on my F150 piece-by-piece for $1000 bucks from JC Whitney - I'm talking fenders, rockers, corners, floor-pans, Doors... the whole shmeal. But then of course ... they made a bazillion of those. I'd have to look, I bought my Soobie for like $500 bucks, but I have a couple three grand in it making sure it starts every time, so I don't mind spending the money. But I'm clearly in the bratman18 camp in that I think it's a shame to let a car go to rust .... maybe I'm just not being realistic. I suppose if I found a rust-free AWD Turbo wagon from the South, I could just switch motors & call it a day ... I'm sure it'd be cheaper than trying to chase all the rust, and not good @ fabricating. Link to comment Share on other sites More sharing options...
ivantruckman Posted April 4, 2009 Author Share Posted April 4, 2009 Saturdays progress all the repair panels are made by hand , cut -bend -weld- repeat Link to comment Share on other sites More sharing options...
erik litchy Posted April 5, 2009 Share Posted April 5, 2009 i dont know about you but my car keeps the undercoating "fresh" the bottom is like new but shinier Link to comment Share on other sites More sharing options...
Markuss Posted April 5, 2009 Share Posted April 5, 2009 Just like the rest of the comments.Cleanup all the surrounding undercoating.After welding brush on rustoleum rusty metal primer,2 to 4 coats. then re undercoat.will be stronger than factory.used to do Beetles,Things,Karmann Ghias and Those ratty 356 Porsches. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now