skishop69 Posted March 30, 2009 Share Posted March 30, 2009 Just curious if anyone here has a pinout for the two engine harness connectors on the EJ22? I'm working on the swap for my XT GL10 and have come to the conclusion that Subaru schematics and pinouts are absolutely the worst I have ever encountered. The schematics really aren't so bad, but the pinouts for anything that is NOT a component are non-existant. I can just pull the engine sensor/component connectors and continuity test them back to the two main connectors, but I'm hoping someone has the pinout. Thanks! Link to comment Share on other sites More sharing options...
s'ko Posted March 30, 2009 Share Posted March 30, 2009 Just curious if anyone here has a pinout for the two engine harness connectors on the EJ22? I'm working on the swap for my XT GL10 and have come to the conclusion that Subaru schematics and pinouts are absolutely the worst I have ever encountered. The schematics really aren't so bad, but the pinouts for anything that is NOT a component are non-existant. I can just pull the engine sensor/component connectors and continuity test them back to the two main connectors, but I'm hoping someone has the pinout. Thanks! year and the chassis the engine came out of would be a big help in getting you the right info. BW Link to comment Share on other sites More sharing options...
Numbchux Posted March 30, 2009 Share Posted March 30, 2009 I've never seen pinouts for the engine harness plugs, specifically. But the FSMs have great pinouts for the ECU plugs and very clear diagrams for the whole engine control system. everything you seek can be found there. '92 legacy diagram can be found here: http://www.numbchuxconversions.com/downloads.htm and I need to add this to that page. ECU voltage pinout: http://www.numbchuxconversions.com/Files/FSMs/1992_Legacy_ECU_I-O.pdf Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now