bheinen74 Posted April 2, 2009 Share Posted April 2, 2009 I am not sure how to make a poll: but this thread post : If you use your hill holder, and how much your hill holder is broke why do we need this what is the hill holder I use my hill holder alot and love it Link to comment Share on other sites More sharing options...
The Dude Abides Posted April 2, 2009 Share Posted April 2, 2009 My hill holder is disconected.` Link to comment Share on other sites More sharing options...
subiemech85 Posted April 2, 2009 Share Posted April 2, 2009 of my past and present..... '84 wagon YES '84 BRAT YES '85 wagon YES '89 3door RX disconnected by previous owner, never bothered to hook it up 11/79 SKI wagon N/A 5/78 BRAT N/A '86 TURBOWAGON yes, but severely out of adjustment as if cable is too long due to ea81 engine swap but will be fixed to work correctly when turbo engine is in 6/92 loyale... it's a crap-o-matic Link to comment Share on other sites More sharing options...
Durania Posted April 2, 2009 Share Posted April 2, 2009 I disconnected it on my BRAT and Hatch, drove me nuts. Link to comment Share on other sites More sharing options...
ivantruckman Posted April 2, 2009 Share Posted April 2, 2009 never, I live in Michigan and we have no hills. Link to comment Share on other sites More sharing options...
lostinthe202 Posted April 2, 2009 Share Posted April 2, 2009 Drove me nuts too, I disconnected it and put a spring from the bracket to the clutch fork. Link to comment Share on other sites More sharing options...
Phizinza Posted April 2, 2009 Share Posted April 2, 2009 Call me old fashioned, but my handbrake does the trick all the time so why have more stuff under the hood? Link to comment Share on other sites More sharing options...
Psyko Posted April 2, 2009 Share Posted April 2, 2009 Just curious, how does it end up driving you guys nuts? I use it on my Brat and have only found it annoying when it doesn't want to engage. Link to comment Share on other sites More sharing options...
lostinthe202 Posted April 2, 2009 Share Posted April 2, 2009 Mostly it's when I'm parallel parking, it kept me from being able to roll back into the spot under certain conditions. For hill starts, it's was a fairly minor annoyance. When I hill start, my body instinctively leans forward a bit knowing that I'm going to drop back a tad before I start. So with the hill holder that sensation wasn't there, yet I was still trying to compensate for it. Kind of like when you're the passenger and you expect the driver to do something (slow down, speed up, whatever) and you compensate for it but they don't do what you expect. Link to comment Share on other sites More sharing options...
Duraznov Posted April 2, 2009 Share Posted April 2, 2009 On my 89 GL Wagon I disconected it, because it was leaking brake fluid. Link to comment Share on other sites More sharing options...
azsubaru Posted April 2, 2009 Share Posted April 2, 2009 I use mine all the time, I don't even realize I do it any more. For my other cars, I use the handbrake or heel-toe it, but I prefer the hill holder. Link to comment Share on other sites More sharing options...
SoobieDoo Posted April 2, 2009 Share Posted April 2, 2009 Not working. Link to comment Share on other sites More sharing options...
PoorManzImpreza Posted April 2, 2009 Share Posted April 2, 2009 My hill holder is disconected.` ditto Link to comment Share on other sites More sharing options...
88RxTuner Posted April 2, 2009 Share Posted April 2, 2009 Mine's disconnected.. I found that when doing reverse 180s in the sand, if you're going backwards, declutch to shift and tap the brake pedal to lighten the front end and whip it, it engages the hill holder... and screws up the whole ballet... That and it seeps brake fluid... 88RxTuner Link to comment Share on other sites More sharing options...
Gloyale Posted April 2, 2009 Share Posted April 2, 2009 I use it and love it. If it screws with letting you *roll* backwards, just let the clutch pedal off a hair. If that doesn't do it it is out of adjustment. Placing a Shim under the rear bolt of it will increase the angle that the car must be tilted back before it will operate. Makes it not so likely to interfere in a parking situation. Never had a problem with any of mine. Link to comment Share on other sites More sharing options...
Subarule Posted April 2, 2009 Share Posted April 2, 2009 '86 4WD Loyale 5-spd. wagon Love my hill holder! My car spent it's first few years in Colorado so plenty of hilly streets & roads that it was very handy for. I have need for & use it occasionally now. Just had it adjusted a few months ago. Link to comment Share on other sites More sharing options...
erik litchy Posted April 2, 2009 Share Posted April 2, 2009 have it connected and it doesnt really help. this car is light enough that it doesnt slip backwards with a lot of momentum. it seems more of a marketing gimick to me. i think a really good candadite would be a pickup truck 1/2 ton or larger. get a decent trailer on there and you will be extra careful pulling out without one. Link to comment Share on other sites More sharing options...
Gloyale Posted April 2, 2009 Share Posted April 2, 2009 have it connected and it doesnt really help. this car is light enough that it doesnt slip backwards with a lot of momentum. it seems more of a marketing gimick to me. You don't live in a mountainous area. Link to comment Share on other sites More sharing options...
capecove Posted April 2, 2009 Share Posted April 2, 2009 Morning folks... The hill holder on our 92 Loyale works excellently thus far and my wife loves it. We have some pretty serious hills here and she is finally free to work the clutch without fear. Personally, it is a fun little gadget that I was amazed to discover. Imagine our surprise when we wouldn't roll backwards on a uphill, we didn't know it even existed. LOL... Link to comment Share on other sites More sharing options...
mcbrat Posted April 2, 2009 Share Posted April 2, 2009 Placing a Shim under the rear bolt of it will increase the angle that the car must be tilted back before it will operate. Makes it not so likely to interfere in a parking situation. Good to know... I'm going to attempt to re-use mine when I replumb all the brake lines on my '82 Brat..... Link to comment Share on other sites More sharing options...
RAugur33 Posted April 2, 2009 Share Posted April 2, 2009 Hill Holders kich a** when driving in San Francisco. Link to comment Share on other sites More sharing options...
nipper Posted April 2, 2009 Share Posted April 2, 2009 They are a godsend when crossing bridges in NYC or anytime your in bumper to bumper traffic. nipper Link to comment Share on other sites More sharing options...
msteel Posted April 2, 2009 Share Posted April 2, 2009 Use mine occasionally. Like it. If it catches when I don't want it to, I just let up on the clutch a bit. To really make it grab it seems I need to push the brakes firmly. I suppose this is by design. Link to comment Share on other sites More sharing options...
Subaru_dude Posted April 2, 2009 Share Posted April 2, 2009 Impreza-d/c GL-was operational and it's hilly around here and everybody has a tendency to get right up on your a$$ on a steep hill in these parts. I've found that the e-brake works just as well though, but it's inconvenient to do so when there's a purse sitting there. Hill holder FTW. Link to comment Share on other sites More sharing options...
MtTech Posted April 2, 2009 Share Posted April 2, 2009 Stupid thing leaks when hooked up and being used. = Disconnected. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now