lostinthe202 Posted April 3, 2009 Share Posted April 3, 2009 Title says it all, for a '96 OBW My FSM is not complete Thanks! Will- Link to comment Share on other sites More sharing options...
bheinen74 Posted April 3, 2009 Share Posted April 3, 2009 should be same as 91-94 legacy. I have the service manuals at home, will post TQ specs tonight, Link to comment Share on other sites More sharing options...
lostinthe202 Posted April 3, 2009 Author Share Posted April 3, 2009 Awesome, thanks! Will- Link to comment Share on other sites More sharing options...
lostinthe202 Posted April 4, 2009 Author Share Posted April 4, 2009 Bumpity Bump, Would LOVE to button this up tomorrow! Thanks!!! Will- Link to comment Share on other sites More sharing options...
Gloyale Posted April 4, 2009 Share Posted April 4, 2009 I just do mine tight with the impact, not like insane, sit there and hammer on it tight,,,,,,,, just enough until the impact seats it good. Then stake it down. Link to comment Share on other sites More sharing options...
NorthWet Posted April 4, 2009 Share Posted April 4, 2009 **1990** Legacy FSM says: 82-91 ft-lbs for the 22mm nut on the mainshaft and 174-188 ft-lbs on the 42mm nut on the pinion shaft. Link to comment Share on other sites More sharing options...
lostinthe202 Posted April 4, 2009 Author Share Posted April 4, 2009 OK, thanks. Usually a big nut like that, I do as Gloyale suggested and just get it tight. But when I took it off, it was staked but it took almost no effort to get it off so I thought it might be some kind of preload thing. I wonder if it being loose contributed to the bearing failure... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now