baccaruda Posted April 10, 2009 Share Posted April 10, 2009 Hi all, I've got a high-resolution recreation of our favorite sticker to spy at the junkyard; I'm going to make oversized (6"x6"?) bumper stickers and some shirts; my original intention was to make reproductions of the actual sticker on the differential because they get worn out and beaten up (go figure!). The best stock I can find on which to print them is not quite the same sort of silvery that the originals are, but these are going to look Really Close. Close enough that it occurred to me that they could be used to scam people into buying open differentials with this sticker on it. I don't see this happening widely, because most people in the market for an LSD know how to verify what they're getting, but I would feel bad if my sticker were used for that purpose. I'm going to sell them, but I'm wondering what your thoughts are on whether I should try to restrict selling them to people who can prove they have an LSD, or not? Trade in your old ratty sticker for a new one? Cause they'd look really cool on the lid of a laptop computer or a toolbox as well as a real LSD Link to comment Share on other sites More sharing options...
Subarutex Posted April 10, 2009 Share Posted April 10, 2009 I think it would be OK. I mean, at a certain point you just have to figure that stupid people will be stupid. You can only go so far as to protect them. Put me in for a shirt, some underwear, a whole bunch of stickers, maybe a set of sheets for the bed at home... Link to comment Share on other sites More sharing options...
bheinen74 Posted April 10, 2009 Share Posted April 10, 2009 can you make them with 3.9 ratio? my sticker is sort of rubbing off on the blue letters, and I edited with a sharpie so mine says 3.9 over the old 3.7 I think it is important to show the ratio so if someone ever needs to swap a tranny, they know what the rear diff is too. I would buy one if it said 3.9 mine is a clutch type converted to 3.9 ring gear. Link to comment Share on other sites More sharing options...
backwoodsboy Posted April 10, 2009 Share Posted April 10, 2009 some underwear... Limited slip underwear sound GREAT! I CAN understand your fear of sticker mis-use though. What are we lookin at for prices? Link to comment Share on other sites More sharing options...
bheinen74 Posted April 10, 2009 Share Posted April 10, 2009 will this fool the Datsun peep's Link to comment Share on other sites More sharing options...
baccaruda Posted April 10, 2009 Author Share Posted April 10, 2009 limited slip underwear, that's funny... I'm glad I thought of it bheinen, I don't know about making a 3.9 variant although I want to; it'll depend on minimums. I might just make a matching 90 square to go over the 70. As far as the Datsun peeps are concerned, I'm going to sell it to them too! BWB, prices are as yet unknown. Less than $50 each, though. Link to comment Share on other sites More sharing options...
bheinen74 Posted April 10, 2009 Share Posted April 10, 2009 I do think we should be concerned in future of buying the LSD diff's. smart buyers will need to get a closeup photo of the internals with the cover removed to be sure. Link to comment Share on other sites More sharing options...
Pooparu Posted April 10, 2009 Share Posted April 10, 2009 I did a set of these decals for a rear end that was converted to 4.111 gears. I totally recreated the decal into a vector format so that I could change the gear ratio. I just printed them on clear and polished the cover. Link to comment Share on other sites More sharing options...
baccaruda Posted April 10, 2009 Author Share Posted April 10, 2009 Yeah, I saw that, it looked good. Link to comment Share on other sites More sharing options...
baccaruda Posted April 10, 2009 Author Share Posted April 10, 2009 Oh yeah, and I might make belt buckles too. :cool: Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted April 10, 2009 Share Posted April 10, 2009 You could change the Fuji Heavy Industries at the bottom to something else so people are aware they are not the original and could raise speculation if a diff with that decal shows up on eBay. Link to comment Share on other sites More sharing options...
baccaruda Posted April 10, 2009 Author Share Posted April 10, 2009 Yeah, I was thinking maybe I'd alter it subtly... I'll play with that this weekend... but if I change it it won't be a reproduction Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted April 10, 2009 Share Posted April 10, 2009 Thats true. Link to comment Share on other sites More sharing options...
4x4_Welder Posted April 11, 2009 Share Posted April 11, 2009 I don't think people will try and scam with that sticker. Honestly, if you can't figure out how to do a .5second check to verify it, you probably shouldn't be trying to install it yourself. It's not like a live axle where it takes effort to find out even if the axle is out, you just grab the stubs and twist in opposite directions. Link to comment Share on other sites More sharing options...
subiemech85 Posted April 11, 2009 Share Posted April 11, 2009 I need one of the correct part # for your convenience a pic is attached Link to comment Share on other sites More sharing options...
edrach Posted April 11, 2009 Share Posted April 11, 2009 some underwear... I'm not sure I'd want an LSD label on my underwear.....too many possibilities! Link to comment Share on other sites More sharing options...
edrach Posted April 11, 2009 Share Posted April 11, 2009 (edited) Maybe you can sell a 2nd version of the LSD label for those of us that have converted to a 3.900 or 4.111 version (not sure what part number I'd be using for that). But I would buy some of each. Edited April 11, 2009 by edrach Link to comment Share on other sites More sharing options...
edrach Posted April 11, 2009 Share Posted April 11, 2009 Oh yeah, and I might make belt buckles too. :cool:Good grief if you go to that extreme you're going to get hassled by the narcs! Link to comment Share on other sites More sharing options...
baccaruda Posted April 11, 2009 Author Share Posted April 11, 2009 4X4Welder, I hear you on that but I've seen a lot of LSDs on eBay and craigslist without the stubs or without the cover off to expose the chunk.. I feel better having everyone here tell me I'm full of it though Sorry SM but one-offs are a no-go. I know there are a few variants but I made the one I peeled off of my own car... making some with a different gear ratio is about all that I'll be doing differently. Pretty much any place that makes stickers will have setup costs and minimums per order. One place I looked at had a minimum of 125 pieces; that would be more than enough for one variant; 250 for two would cost me twice as much and take twice as long to recoup. I'd rather spend the money on getting other stickers made... :D I do want to also make a 2200 4WD version of this one though. I will make the sedan/coupe style badge if I can get a low enough minimum. I plan to have patches of these made to sell as well but it will take time because of the production costs. SubaruTex is perhaps going to be printing the stickers; depending on costs and minimums I'll have the LSD repro sticker first, or maybe a few of these. Link to comment Share on other sites More sharing options...
edrach Posted April 11, 2009 Share Posted April 11, 2009 4X4Welder, I hear you on that but I've seen a lot of LSDs on eBay and craigslist without the stubs or without the cover off to expose the chunk.. I feel better having everyone here tell me I'm full of it though Sorry SM but one-offs are a no-go. I know there are a few variants but I made the one I peeled off of my own car... making some with a different gear ratio is about all that I'll be doing differently. Pretty much any place that makes stickers will have setup costs and minimums per order. One place I looked at had a minimum of 125 pieces; that would be more than enough for one variant; 250 for two would cost me twice as much and take twice as long to recoup. I'd rather spend the money on getting other stickers made... :D I do want to also make a 2200 4WD version of this one though. I will make the sedan/coupe style badge if I can get a low enough minimum. I plan to have patches of these made to sell as well but it will take time because of the production costs. SubaruTex is perhaps going to be printing the stickers; depending on costs and minimums I'll have the LSD repro sticker first, or maybe a few of these. You might talk to Subarutex about the artwok and such. I know he's in that business. Link to comment Share on other sites More sharing options...
baccaruda Posted April 11, 2009 Author Share Posted April 11, 2009 Thanks Ed, I'm actually sort of in that business myself and will probably have Tex print them for me. Link to comment Share on other sites More sharing options...
baccaruda Posted April 28, 2009 Author Share Posted April 28, 2009 Well, I'm going thru Tex for sure now; he's a much nicer guy than the other label companies so that means I can plan to do smaller runs of the LSD sticker with other gear ratios!! :banana: He's still looking for a suitable stock on which to print them. We may not end up with an exact match to the original stock, and I've been looking off and on for a couple of years now, but I guess that's OK as it might negate some of my counterfeiting concerns. Link to comment Share on other sites More sharing options...
ezapar Posted April 28, 2009 Share Posted April 28, 2009 can you make them with 3.9 ratio? That's easy. done. Link to comment Share on other sites More sharing options...
boxerbob Posted April 28, 2009 Share Posted April 28, 2009 I'd buy one if you could do 4.444 . for my ej-swap and jdm Gearing to match. used the old LSD with newer gears Link to comment Share on other sites More sharing options...
Flowmastered87GL Posted April 28, 2009 Share Posted April 28, 2009 I think its a good idea. Regarding people faking diffs... someone could make a write up for the USRM describing how to know if you have an LSD on your hands or a rebadged open Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now