TheLoyale Posted May 9, 2009 Share Posted May 9, 2009 Hey, Well my wagon finally has 14s on it! No lift (Yet) but I did gain 2" if not more from the new tires. Tires are 205/75R14s BFG Long Trails T/As Here are some pics! Theres about a 1ft. if not more under the rear diff now. (I'll measure it tomorrow) OK, so heres before and after Powder coating. BEFORE: Monday AFTER: Wednsday Thanks for looking and the help you guys have giving me. -Tom PS: Does anyone know of any aftermarket center caps that will work on the 505 pugs? Feel free to post pics of any Link to comment Share on other sites More sharing options...
bheinen74 Posted May 9, 2009 Share Posted May 9, 2009 you are not going to be able to turn so you will have to cut or lift or both Link to comment Share on other sites More sharing options...
TheLoyale Posted May 9, 2009 Author Share Posted May 9, 2009 (edited) Yes I can turn, only time it rubs is if you turn full and hit a bump or an uneven suface (Driveway entrance) it just hits on the lower front and back part of the front fenders. so yea, I'll trim it a little to give it room when the strut bounds/rebounds. gonna use a air cut-off tool tomorrow btw, in the second picture you can see where I did a little bashing, so I'll need to cut that plus a little more to be on the safe side. Edited May 9, 2009 by TheLoyale Link to comment Share on other sites More sharing options...
bheinen74 Posted May 10, 2009 Share Posted May 10, 2009 they look really good where did you get tires and how much> Link to comment Share on other sites More sharing options...
Spiffy Posted May 10, 2009 Share Posted May 10, 2009 wow, those look really good... makes me wish I had mine powder coated... Link to comment Share on other sites More sharing options...
Sooba Posted May 10, 2009 Share Posted May 10, 2009 Looks tough mate! Suits the car really well. Link to comment Share on other sites More sharing options...
TheLoyale Posted May 10, 2009 Author Share Posted May 10, 2009 bh I got the tires from F&F Tire group (A real tire shop) umm lets see, total was $503 but they charged me $16 for tire disposal (I didn't have any tires nor stems on them) So I'll get that back monday. I got the wheels powder coated at Hy-tec coatings, $300 flat for blasting, priming and coating. oh and the new acorn were $40:rolleyes: Spiffy Thanks, yea theres alot of PCing shops up by you. Sooba Thank you too, yep I'm pretty happy on how it looks so far Link to comment Share on other sites More sharing options...
audio_file Posted May 10, 2009 Share Posted May 10, 2009 they look really good +1, those pug steelies look great powder coated . . . Link to comment Share on other sites More sharing options...
TheLoyale Posted May 10, 2009 Author Share Posted May 10, 2009 Ok, did the triming of the front fenders today.. worked awesome! I'll get a picture when I get time Link to comment Share on other sites More sharing options...
backinbrat Posted May 11, 2009 Share Posted May 11, 2009 they look rood! na man, screw it, get some 45 or 50 series on there, and drop it, that'll look the F**KING DOGS looking forward to seeing it lifted as well, they are spot on imo them wheels, nice one Link to comment Share on other sites More sharing options...
The Dude Abides Posted May 11, 2009 Share Posted May 11, 2009 i loved the stuffed look, but i would of gone with a shorter tire so i wouldnt have rubbing issues. Link to comment Share on other sites More sharing options...
mcbrat Posted May 11, 2009 Share Posted May 11, 2009 those wheels look good dirty too http://www.ultimatesubaru.net/80s/mick/gallery/redbrat3.jpg Link to comment Share on other sites More sharing options...
The Scooby Posted May 11, 2009 Share Posted May 11, 2009 looks good, with even a 2inch lift i think its will be perfect Link to comment Share on other sites More sharing options...
Durania Posted May 11, 2009 Share Posted May 11, 2009 Makes that wagon look mean. I like it. Link to comment Share on other sites More sharing options...
93Newbaru Posted May 12, 2009 Share Posted May 12, 2009 Looks very good, pictures like these push me even harder to get my wagon on the road. Link to comment Share on other sites More sharing options...
TheLoyale Posted May 12, 2009 Author Share Posted May 12, 2009 Backinbrat, drop a EA82 wagon Lol! Why not put 22s on it then but thank you, yea hopeing do a 2" lift soon. The Dude, yea it looks a little stuffed but not bad in person. It still looks better then having those 165/80R13s Douglas on it lol. Mick, oh yea. you did have BFG M/Ts in 14s. wish they would bring them back in 14s. Any Soob looks good dirty! Scooby, much obliged. yea I'd think about a 4" more if ya didn't need a longer steering shaft and new crossmembers. So I think a 2" is enough C'mon, look at what Jeff "Oneye" does with a 2" Durania, yep its fun to pull behind a car and be higher then them. My front bumper is now level with the rear bumper on my parents S-10 Blazer.. Still a little lower then their FJ, But I have more clearance under the front then the FJ! 93Newbaru, Thank you. Hope you get it up and going soon Link to comment Share on other sites More sharing options...
The Scooby Posted May 12, 2009 Share Posted May 12, 2009 oh ya i know how jeff rolls. i can't wait to get mine out and dirty again. Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted May 12, 2009 Share Posted May 12, 2009 I Really Like the Look of Your Subie! ... ...with Those 14" Pug Wheels that Look very Nice Powder Coated, Great Job! ... Well Done!!! I Believe that your Subie got More Clearance UnderBody than some other Bigger Cars, Even Without a Lift Kit; Because Lift Kits Needs to Drop the Engine CrossMember and the Rear Diff... Also: I Got Around the Same Tire Clearance / Rubbing on my Subies, `cos I Run Fat 205 Tires; No Problems after all These Years Drivin` Like That... I Even Feel that the Vehicle`s Stability have Increased. Kind Regards. Link to comment Share on other sites More sharing options...
SubaruJawn Posted May 12, 2009 Share Posted May 12, 2009 all you have to do is put red center caps on the rims. and paint RADIOFLYER on each side ! back window " Tom's Lil Red Wagon " :lol::lol::lol: Looks Awesome Tom ! Scale of 1-10 i give you a 9 Link to comment Share on other sites More sharing options...
TheLoyale Posted May 13, 2009 Author Share Posted May 13, 2009 Scooby, Dirty Subaru? Clean Subaru? Hmm gonna go with the dirty Subaru! But you can always get the clean one all mudded up for the naybors to look at LOL! JesZek, thank you very much! yes I do have more clearance then any bigger/older car. I was behind a Toyota tercel today (Muhahaa) my bumper is up to the bottem of his tail lights! I get looks from people all day, Can't wait to go to the dealer for a part now, I'm way higher then a OB (Was next to one a wally world today) God bless JesZek John, Lol yea radio flyer huh.. Just need some redline tires to complete that Haha. Thanks Link to comment Share on other sites More sharing options...
cameron 1 Posted May 13, 2009 Share Posted May 13, 2009 those tires look massive under that car i like it Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted May 13, 2009 Share Posted May 13, 2009 ...God bless JesZek ... Thank You! ... You`re So Kind! I Really Like your Red Wagon, those Rims & Tires Match Perfectly with its Colour & Shape. If you Park it aside to a "Standard" Loyale Wagon from a Friend, you`ll Notice the Difference; maybe you can Take a Picture of Both and Post it Here. Kind Regards. Link to comment Share on other sites More sharing options...
TheLoyale Posted May 13, 2009 Author Share Posted May 13, 2009 (edited) Cameron, Haha thanks.. JesZek, I would but I don't know/live close to anyone with a Loyale Loyales seem rare here in Lower east WI.. But cool idea! oh and btw, if you use a 2" lift, you don't need to change the crossmembers nor lower the rear diff. But yes, it seems more stable (Probably the added waight of the tires plus the width) Edited May 13, 2009 by TheLoyale Link to comment Share on other sites More sharing options...
Gloyale Posted May 13, 2009 Share Posted May 13, 2009 Cameron, Haha thanks.. JesZek, I would but I don't know/live close to anyone with a Loyale Loyales seem rare here in Lower east WI.. But cool idea! oh and btw, if you use a 2" lift, you don't need to change the crossmembers nor lower the rear diff. But yes, it seems more stable (Probably the added waight of the tires plus the width) There isn't any need to change crossmembers on a 4 inch lift either. Just add the spacers. Link to comment Share on other sites More sharing options...
TheLoyale Posted May 13, 2009 Author Share Posted May 13, 2009 There isn't any need to change crossmembers on a 4 inch lift either. Just add the spacers. Oh, didn't know that. but you do still need a longer steering shaft. Thank you for the info Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now