shortskoolbus Posted May 16, 2009 Share Posted May 16, 2009 Can I install this thing off the engine since i took the support off to change the o-ring anyway. Quote Link to comment Share on other sites More sharing options...
davebugs Posted May 16, 2009 Share Posted May 16, 2009 I don't. See a similat thread about doing hte crank seal while the oil pump is off within the last few weeks. It's personal preference - but I install AFTER that little piece over the canshaft is back on the engine. Quote Link to comment Share on other sites More sharing options...
porcupine73 Posted May 16, 2009 Share Posted May 16, 2009 I have done it both ways; doesn't seem to make much difference either way. If you do it before, maybe grease the cam a little bit to help the seal slide over it without getting nicked. Quote Link to comment Share on other sites More sharing options...
avk Posted May 16, 2009 Share Posted May 16, 2009 (edited) If you removed the dipstick tube, replace the two O-rings there as well. Edited May 16, 2009 by avk clarificature Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.