Jump to content
Ultimate Subaru Message Board

Recommended Posts

I did search 1st, but no joy, new to me SVX:banana: 92 170k, check engine light comes on goes off, starts good drives good. How to pull codes for CEL? Done it on 90 legacy but this SVX is blinding me with it beauty and awe:eek::)..........thanks all,G

Link to comment
Share on other sites

I did search 1st, but no joy, new to me SVX:banana: 92 170k, check engine light comes on goes off, starts good drives good. How to pull codes for CEL? Done it on 90 legacy but this SVX is blinding me with it beauty and awe:eek::)..........thanks all,G

 

Its OBD1, so it should be easy to pull the codes with a reader.

If you want better/more info, go to http://www.subaru-svx.net/forum/forumdisplay.php?s=&daysprune=30&f=2

Link to comment
Share on other sites

oops my bad, heres the deal, turn on key all lights lite, start engine all lites except CEL go off, let warm up for awhile CEL goes off, drive little or just let run in driveway CEL back on, goes off good, comes on bad. and today it stalled a couple o times in the driveway,and i found the front knock sensor with a beautiful crack, that will be fun to change correct? MY question also is are there dangle connectors under the dash to check the codes. Thanks for the info so far, really do appreciate the help

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...