idosubaru Posted May 29, 2009 Share Posted May 29, 2009 I ordered Oxygen sensors for a 2001 (5/2000 mfg date) OBW H6 and the sensors I received are different than what is in the car. The part number is different and the connector is different. The part number Subaru shows and that I received is: 22690AA45C I didn't write down what mine is but it's not the same and has a different connector. Anyone know what I'm missing here? Link to comment Share on other sites More sharing options...
CNY_Dave Posted May 29, 2009 Share Posted May 29, 2009 (edited) Are you getting all 3 O2 sensors? http://www.subarupartsforyou.com/cp_partlistbymod.php?model=Outback&subcat=Engine+Parts%2C+Sensor+O2&year=2001 shows 2 front sensors (C,D) PN 22641AA03C and one rear sensor (F) 22690AA45C (the number you give) Dave Edited May 29, 2009 by CNY_Dave Link to comment Share on other sites More sharing options...
porcupine73 Posted May 29, 2009 Share Posted May 29, 2009 Yah that part # 22690AA45C is a rear o2 sensor. The sourcing site incorrectly lists it as being for both front and rear for the H6. Link to comment Share on other sites More sharing options...
ShawnW Posted May 30, 2009 Share Posted May 30, 2009 I believe the discrepancy is the front ones are Air fuel not o2. Technically there is only 1 o2 sensor on that car and its measuring the cat efficiency more than anything. Sorry you got the wrong parts though. Link to comment Share on other sites More sharing options...
idosubaru Posted May 31, 2009 Author Share Posted May 31, 2009 they are exchanging them for what i need, so it's all taken care of. thanks for the help folks. porcupine really went to town on the outback forum! i figured i screwed something up, i had no clue it was a glitch on their end. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now