Subafly Posted June 9, 2009 Share Posted June 9, 2009 Its an Acura integra. He sprayed down the engine with the hose the other day. It was then running rough. He said he thought there might be water in the disty so I told him some WD-40 would fix his problem. I gues he sprayed it in the disrtibutor its self. Now it wont run. I didnt think it would cause problems. Any thoughts? Thanks, Brian Link to comment Share on other sites More sharing options...
The Beast I Drive Posted June 9, 2009 Share Posted June 9, 2009 I would have to check the properties of WD-40, but if it is conductive, then I would assume he fried the ignition modual in the disty. Or something to that effect. WD-40 does displace water, but you should always check on stuff like that before you use it on electronics and make sure it is NON-CONDUCTIVE, otherwise it could be worse than water my .02 -Bill Link to comment Share on other sites More sharing options...
Subafly Posted June 11, 2009 Author Share Posted June 11, 2009 ya for real. We just let it evaporate out, worked a lot better after that. Turned out his plugs were loose and really dirty. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now