tidd1340 Posted June 26, 2009 Share Posted June 26, 2009 Need to replace..mines rotted away ..weres the best place to get one? Link to comment Share on other sites More sharing options...
davebugs Posted June 26, 2009 Share Posted June 26, 2009 I can't recall where it is. But I've got a 96 2.5 setting here that had bad bearings I took out of a running(poorly running) car with no CEL about a month ago. Tell me where it is, make me an offer. I may be able to get it out tomorrow. I believe I've looked at one trouble shooting a car but it wasn't the problem so I forget where it is. Unless it's not on the engine? Link to comment Share on other sites More sharing options...
tidd1340 Posted June 26, 2009 Author Share Posted June 26, 2009 Mine is a wagon.It was located in the rear passenger side underneath by the tank and charcoal canister..not sure if they are the same as a 2.2..anyone have a part #? Link to comment Share on other sites More sharing options...
davebugs Posted June 26, 2009 Share Posted June 26, 2009 Didn't save that part. But if it's pricey I'll be parting a 97 OBW in about 2 weeks. Link to comment Share on other sites More sharing options...
tidd1340 Posted June 26, 2009 Author Share Posted June 26, 2009 Looks like its model specific..need part # 42084FA090..they asked for my vin as there was a change mid year..dealer wants 155.00!! Found it online for 111.00.Is there anyway to cheat these? I have a cel on and it wont pass NY inspection.I have until Sep. to figure it out. Link to comment Share on other sites More sharing options...
davebugs Posted June 26, 2009 Share Posted June 26, 2009 Send me a pic and a location. If noone else has one I'l lbe parting a 97 OBW in a few weeks. I'll look for it and it's part# then. Link to comment Share on other sites More sharing options...
tidd1340 Posted July 8, 2009 Author Share Posted July 8, 2009 can get a pic as mine rotted away..its a bacl box with a connector to it,and the vent hoses connect to it..are you still parting out the wagon? Link to comment Share on other sites More sharing options...
davebugs Posted July 8, 2009 Share Posted July 8, 2009 Yep. Been tied up with a 95 LSi and went to look at a WRX tonight (which would be my first). Trying to get to my antiques. Picked up a clutch kit, rear main seal, etc for the 71 bus today. I need to get another car in tomorrow to determine whether to fix it or part it (a VW). Then it'll probably be parting the 97 OBW unless I get this WRX. Link to comment Share on other sites More sharing options...
Fairtax4me Posted July 9, 2009 Share Posted July 9, 2009 Junkyard. If its just the canister you need, they all work the same way, you can rig up one from a Ford (I know, god forbid) or any other car/truck and it'll work well enough. Link to comment Share on other sites More sharing options...
tidd1340 Posted July 9, 2009 Author Share Posted July 9, 2009 Canister is fine..i need the solenoid. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now