kiwisub Posted July 1, 2009 Share Posted July 1, 2009 hello all , this model was never officialy imported to new zealand so no subaru dealers have any info on this car , it has adjustable valve clearences , i need to know the clearences to adjust my inlet and exhuast valves ...any info that some one has or point me to a website that has this would be most helpful ... many thanks for any replies cheers blair Link to comment Share on other sites More sharing options...
Legacy777 Posted July 2, 2009 Share Posted July 2, 2009 I'm not sure if you're going to find much info on here, as the US didn't get the 1.5 liter model either. You may want to try a Subaru board in Europe/UK. Other suggestion would be to find specs from newer subarus without hydraulic lifters and use that. You may have to do some trial and error. Link to comment Share on other sites More sharing options...
john in KY Posted July 2, 2009 Share Posted July 2, 2009 Check around under the hood/bonnet for a sticker. Often times the manufacture will put one there with tune up specs. Another option, at least here in the States, is to go to the local library and request the factory service manual for this model. The librarian will contact other libraries until the manual is found. May take a week or more. Link to comment Share on other sites More sharing options...
Jerry DeMoss Posted July 2, 2009 Share Posted July 2, 2009 As the other guys stated earlier you are probably good to go with something like the valve clearance of a newer subaru engine. Something like the newer ej25 sohc. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now