ruparts Posted July 4, 2009 Share Posted July 4, 2009 Hi, i have a pair of front control arms from a 80 model 2-wd coupe, I need to know if these the same as a 84 4x4 wagon?? obveously they look the same , but are they? anyone have a parts book going back to 80, mine is only ea-82 cars. thank you Link to comment Share on other sites More sharing options...
Bucky92 Posted July 4, 2009 Share Posted July 4, 2009 If you give me alittle time.. I have a parts book for 1983 ..and I can look it up for you. I believe they are the same though..because everything else in the front is the same between FWD and 4WD..but to be sure I will look it up. Link to comment Share on other sites More sharing options...
Bucky92 Posted July 4, 2009 Share Posted July 4, 2009 Yup its the same for FWD and 4WD Link to comment Share on other sites More sharing options...
ruparts Posted July 7, 2009 Author Share Posted July 7, 2009 Hey, OK , Thank you for looking that up, at least now i know they'll fit my wagon. Yup its the same for FWD and 4WD Link to comment Share on other sites More sharing options...
bheinen74 Posted July 7, 2009 Share Posted July 7, 2009 not to burst a bubble but even on the 1991-1994 legacy, subaru front end between FWD and AWD was different at least the axles were different the reason is the FWD axles were actually beefier than the AWD axles. Not sure how that correlates to the control arms, but even he control arms on the newer ones were different. the higher end models (usually the AWD models) had an extra stabilizer bar bracket, which the mount bracket was absent on the control arm of lower models. I would guess similar for this question. Link to comment Share on other sites More sharing options...
The Beast I Drive Posted July 7, 2009 Share Posted July 7, 2009 On EA81s, *almost* everything on the front end is the same between 4wd and 2wd models. I swapped the whole front suspension (lower arms, struts, hubs, axles, brakes, etc.) from a 1980 GL-5 2wd wagon and put it on my 1985 4wd Brat EA81s are possibly the most interchangeble cars there are... -Bill Link to comment Share on other sites More sharing options...
Bucky92 Posted July 7, 2009 Share Posted July 7, 2009 I am sitting here looking at my dealer 83 parts catalog.... and front control arms have the exact same part number between FWD and 4WD.. and as for axles etc.. I have used 4WD front end parts plenty of times on my FWD Loyale and know people who have done the opp used FWD parts on their 4WDs. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now