kingcole Posted July 22, 2009 Share Posted July 22, 2009 (edited) have a 99 AWD wagon with 2.5 & auto tranny. have engine vibration which seems to occurr during eccelleration maybe after 1800rpm. replaced axle on driver's side with used axle/knuckle a while back when wheel bearing had failed. that assembly appears to be tight per my mechanic friend. he thinks it is a tranny issue. engine vibrates when car is on jacks. vehicle did not move foward one time but was ok after putting it in reverse. any ideas how to isolate the problem or fix it? have checked the drive shaft and it seems to be OK. Ken Edited July 23, 2009 by kingcole more info Link to comment Share on other sites More sharing options...
nipper Posted July 23, 2009 Share Posted July 23, 2009 And just where did the axle come from? There are lots of posts on vibration after an axle replacement. nipper Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now