MSSLGECKO Posted July 24, 2009 Share Posted July 24, 2009 I was gonna drag it home w/ my d.d. cause the p.o. made it sound like it would barely run. No tools necessary, it drove (slowly) home on its own! 58K original miles w/ documents all the way back to purchase. It needs some work, mostly w/ the brakes, the smoking turbo (?), and some cosmetics. Interior is perfect w/ electric windows and a broken digi-dash. Link to comment Share on other sites More sharing options...
bratman18 Posted July 25, 2009 Share Posted July 25, 2009 pics? Link to comment Share on other sites More sharing options...
MSSLGECKO Posted July 25, 2009 Author Share Posted July 25, 2009 Can you not see the pic.s in my first post?? They're in my album anyways. Link to comment Share on other sites More sharing options...
bratman18 Posted July 25, 2009 Share Posted July 25, 2009 Can you not see the pic.s in my first post?? They're in my album anyways. no there are no pics in the post. I will take a lookie. Looks nice!! Is that one that was for sale on here? Link to comment Share on other sites More sharing options...
TheLoyale Posted July 25, 2009 Share Posted July 25, 2009 Oh hoo hoo! Looks nice. EA81T!!! What color is that anyway? Nice score Link to comment Share on other sites More sharing options...
MSSLGECKO Posted July 25, 2009 Author Share Posted July 25, 2009 So, I'm trying to figure out the oil leak / smoke / reportedly dead turbo issue. There's a pretty fast oil leak from the (inlet) oil line going to the turbo on the top. It's called a 'union bolt'. Is this a part I need to order from the dealership? Anyone have experience with this part? It looks like the oil is dripping on the exhaust, so I think this will be an easy fix. Can someone tell me how to determine the condition of the turbo? Link to comment Share on other sites More sharing options...
MSSLGECKO Posted July 25, 2009 Author Share Posted July 25, 2009 I'm trying to figure out where to get a replacement screw: It's called the 'union screw' and connects the oil line to the turbo. Is this a part I need to get from the dealership or is it common enough to get at a parts store? It's the one that connects through the oil line and into the turbo unit. Link to comment Share on other sites More sharing options...
Turbone Posted July 26, 2009 Share Posted July 26, 2009 Its called a banjo fitting. The bolt has a hole thru have a brassit for the oil. It should also have a brass washer on both sides of the bolt. This might be causing the leaking if one is missing. The only way to find out if the turbo is any good is to open both ends and check for shaft play. Link to comment Share on other sites More sharing options...
MSSLGECKO Posted July 26, 2009 Author Share Posted July 26, 2009 Thanks, you're the best! Link to comment Share on other sites More sharing options...
Turbone Posted July 26, 2009 Share Posted July 26, 2009 Thanks, you're the best! Ah gee :-p Link to comment Share on other sites More sharing options...
MSSLGECKO Posted July 26, 2009 Author Share Posted July 26, 2009 Well, it looks like the hard line has a hole in it. Furthermore, it looks like this EA81T never got the recall cooling upgrade for the turbo. I suspect the turbo is indeed dead. Perhaps I'll go to the dealership to demand the factory recall ! How do I order a replacement hardline w/ the necessary fittings? Or, can anyone recommend a 'band-aid' fix for a small hole on the oil line, (like jb weld . .) ? Link to comment Share on other sites More sharing options...
carfreak85 Posted July 26, 2009 Share Posted July 26, 2009 Great looking coupe, I'm glad someone stepped up to save another turbo! Until you find a replacement hardline or get the original one brazed, just don't drive the car. More pics please!!! Link to comment Share on other sites More sharing options...
MSSLGECKO Posted July 26, 2009 Author Share Posted July 26, 2009 Its not moving, and I don't have a digi-cam handy or a url to upload hi'er res pic.s It's beautiful, and I'm in love again. ea81t's are the best. I found the sunroof bag in the original plastic unused last night. Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted July 26, 2009 Share Posted July 26, 2009 To do a quick check on your turbo, you can unbolt the downpipe from the rear of the turbo itself, and gain access to the impellor. Grab its shaft (heh heh) and just give it a good jiggle. In & Out, then up & down.... if there is ANY.... ANY play at all, you may have issues. Link to comment Share on other sites More sharing options...
MSSLGECKO Posted September 19, 2009 Author Share Posted September 19, 2009 So I put it all together and ran the engine until it was warm. Once it is warmed up it smokes from the turbo (not a surprise) and from the bottom of the pass. side valve cover which is my concern. The turbo definitely is leaking oil internally b/c there IS a little oil in the intake. I'm not sure what the deal might be with the valve cover leak, never seen that before. Can anyone suggest what the problem might be? I DO have new valve cover gaskets somewhere that wouldn't be hard to install, but I'm not sure that seems like the culprit here. Should I be looking for a replacement EA81T and/or a wrecked wrx here? Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 19, 2009 Share Posted September 19, 2009 The valve cover gaskets are cork - it's common for them to leak. Just replace it - takes like 10 minutes. GD Link to comment Share on other sites More sharing options...
MSSLGECKO Posted September 19, 2009 Author Share Posted September 19, 2009 So, you're saying that it's not totally abnormal to see smoke coming from a dead valve cover gasket? Thanks, I'll do the switch on that. I seem to recall you (GD) mentioning that coating the cork gasket in permatex black and letting it sit overnight is your preferred method, right? Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 19, 2009 Share Posted September 19, 2009 So, you're saying that it's not totally abnormal to see smoke coming from a dead valve cover gasket? Thanks, I'll do the switch on that. I seem to recall you (GD) mentioning that coating the cork gasket in permatex black and letting it sit overnight is your preferred method, right? Ultra Grey is what I use, but black would work as well. You may be seeing blow-by gasses if the leak is really bad. GD Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now