opus Posted August 3, 2009 Share Posted August 3, 2009 Can someone rough guess by looking? He said late 80's-early 90's Soob. Link to comment Share on other sites More sharing options...
()__1337_CRAYOLA__()> Posted August 3, 2009 Share Posted August 3, 2009 looks like its 4 on 140 they should really fit any Subaru from the 80's early 90's other than the justy Link to comment Share on other sites More sharing options...
ivantruckman Posted August 4, 2009 Share Posted August 4, 2009 you may have issues using it on the front wheel. it may rub the brake caliper Link to comment Share on other sites More sharing options...
The Beast I Drive Posted August 4, 2009 Share Posted August 4, 2009 Thats an EA82 steel wheel, You can tell by the raised ring that the bolt holes are drilled into and the soft indents(as opposed to a hard, clearly visible line) around the spokes/holes. it will fit any 4 on 140mm Subaru hubs, except the rear wheels on gen 1 cars, it will scrape the control arm... No rubbing issues with any front calipers though. -Bill Link to comment Share on other sites More sharing options...
gwilson87 Posted August 4, 2009 Share Posted August 4, 2009 Hmmm... what tires are those? They look nice and meaty. I'm in the decision phase of that right now. Link to comment Share on other sites More sharing options...
suba Posted August 5, 2009 Share Posted August 5, 2009 With a welder they'll fit anything. Link to comment Share on other sites More sharing options...
monstaru Posted August 5, 2009 Share Posted August 5, 2009 how does a welder help? With a welder they'll fit anything. Link to comment Share on other sites More sharing options...
Niku-Sama Posted August 5, 2009 Share Posted August 5, 2009 those look the same as mine and mines a 90 Link to comment Share on other sites More sharing options...
Greenley Posted August 5, 2009 Share Posted August 5, 2009 those look the same as mine and mines a 90 Thats an EA82 steel wheel Link to comment Share on other sites More sharing options...
suba Posted August 5, 2009 Share Posted August 5, 2009 With a welder they'll fit anything. I was just being a smartass.... I had no usefull information Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now