nolicense Posted August 8, 2009 Share Posted August 8, 2009 just picked myself up a weber 32/36 dfav from a guy who had it on a VW until he rear-ended someone totaling his bug. It has been converted to electric choke. first I know the throttle plate is on the opposite side compared to a DG weber, but can I still use the same adaptor to bolt it to my ea81 manifold? I dont mind changing the throttle cable position, and running longer fuel lines to it. I just couldnt pass up the killer deal I got. it has been ran less than 2k miles and he showed me the original receipt for it when he bought it in january. and im talkin a killer deal. Ive read that the dg and df are basically the same except for the throttle plate placement. just wanna make sure I can use the dg adaptor instead of having to fab a custom one. Link to comment Share on other sites More sharing options...
nolicense Posted August 8, 2009 Author Share Posted August 8, 2009 oh yeah, and since it was on a bug I dont need to rejet it do I? Link to comment Share on other sites More sharing options...
Greenley Posted August 8, 2009 Share Posted August 8, 2009 A standard EA81 adapter plate from redline will work fine. You should definitely open it up and check the jetting, most likely you'll need to rejet. I got a BRAND new in box 38/38 for $25.00, did you get a better deal than that? Link to comment Share on other sites More sharing options...
nolicense Posted August 8, 2009 Author Share Posted August 8, 2009 (edited) I got a BRAND new in box 38/38 for $25.00, did you get a better deal than that? you beat me by fifteen bones...good deal... so Ive worked with carbs a ton, but never really re-jetted one. do the jets have their size stamped on them at all, or how do I find out what size jets I have. one more question, should I just use the ea81 manifold I have or should I swap in an ea82 manifold to bolt the weber to? Edited August 8, 2009 by nolicense Link to comment Share on other sites More sharing options...
Greenley Posted August 8, 2009 Share Posted August 8, 2009 Go with the EA82 manifold if you have that option. Jet size is stamped on each jet. Check everything, seeing as it was used for a VW application. Realistically you should only have to worry about the Main, Air corrector, and idle jets. But ya never know. Link to comment Share on other sites More sharing options...
nolicense Posted August 9, 2009 Author Share Posted August 9, 2009 what size jets should I replace them with if they arent the right sized jets? Link to comment Share on other sites More sharing options...
hatchsub Posted August 9, 2009 Share Posted August 9, 2009 Jets are as follows: 140/140 main jets 160/170 air corrector jets 50 or 55 or 60 main idle jet. Secondary idle jet should be fine at 50. On my car i found i needed to run a 60 on the main idle jet so there was no dead spot right off the line. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted August 9, 2009 Share Posted August 9, 2009 The 170 AC should be in the primary, not the secondary - larger AC's lean out the mixture which is not what you want for WOT operation and the secondary is larger - requiring more fuel. You probably won't have to change the pump jets, but check the emulsion tubes to be sure they are F50's. That's the common one for our application so they are likely to be correct. GD Link to comment Share on other sites More sharing options...
edrach Posted August 9, 2009 Share Posted August 9, 2009 I see you're in Everett; that works in your favor. Check out Bow Wow auto parts in Lynnwood. They'll have the adapter plate and throttle linkage you need for the install. I used their parts for the dfav I installed in my son's brat. Ask for Chris, he's Subaru friendly. Link to comment Share on other sites More sharing options...
nolicense Posted August 9, 2009 Author Share Posted August 9, 2009 edrach - my brother told me bow-wow sold it, so im hittin them up on thursday. do they sell jets for the weber there as well? I want to get this running as soon as I can and dont want to have to order some if I find out I need some Link to comment Share on other sites More sharing options...
hatchsub Posted August 10, 2009 Share Posted August 10, 2009 If they dont talk to Bigjim at overseas in Vancouver Canada. hes a member on here and has a few posts about webers in the venders forum. Good guy to deal with. Link to comment Share on other sites More sharing options...
edrach Posted August 10, 2009 Share Posted August 10, 2009 (edited) edrach - my brother told me bow-wow sold it, so im hittin them up on thursday. do they sell jets for the weber there as well? I want to get this running as soon as I can and dont want to have to order some if I find out I need someI think they will carry the jet or can get them for you. Otherwise try carbs unlimited in Fife; they have everything for the weber. www.carbsunlimited.com in Auburn, Fife, and Kent. Edited August 10, 2009 by edrach Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now