subaruguru Posted August 20, 2009 Share Posted August 20, 2009 (edited) dave on the left justin (woogy) on right getting ou of auburn outside cle elum Trip was a success was good to get out of town the EJ had plenty of power with the 3.7 turbo Transmission no lo range pulled snoqualmie pass in 3rd gear at 52 MPH was great got a lot of looks an thumbs up from truckers EJ swap is by far the best swap i have ever done. Total trip around 400 miles burned 18 gallons of fuel estemated mileage around 25mpg i think that is pretty good for hauling an empty trailer half the time and a 4x4 station wagon the other half. Thanks for looking Rob. Edited August 20, 2009 by subaruguru Link to comment Share on other sites More sharing options...
Flowmastered87GL Posted August 20, 2009 Share Posted August 20, 2009 How did it do with compression braking / regular braking with all that extra weight behind it?? The ute conversion looks sweet Link to comment Share on other sites More sharing options...
subaruguru Posted August 20, 2009 Author Share Posted August 20, 2009 i actualy did my front breaks befor i left for the coast so breaks worked prety good as long as i did not mash on them but most of the time it was a combo of compression and normal breaking but both worked great. Link to comment Share on other sites More sharing options...
Durania Posted August 20, 2009 Share Posted August 20, 2009 I would like to see some behind the seat pics of the black car. (I don't know if I need to call it an EA82 BRAT or a wagon.) Link to comment Share on other sites More sharing options...
Subaru_dude Posted August 20, 2009 Share Posted August 20, 2009 That thing looks AWESOME!!!!! I would TOTALLY drive that to work (union job, union built or die attitude). Yeah I would like to see some under hood/interior/close up exterior pics of that rig. Nice job!! Link to comment Share on other sites More sharing options...
subaruguru Posted August 20, 2009 Author Share Posted August 20, 2009 i will grab some more pics just had some more work done to it the beast i drive (bill) is the man doing the metal work. Rob. Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted August 20, 2009 Share Posted August 20, 2009 DUDE!!! Using that 3door is such a better idea than trying to convert a wagon. That thing looks badaas! Link to comment Share on other sites More sharing options...
The Beast I Drive Posted August 21, 2009 Share Posted August 21, 2009 :banana:Thanks for bringin the wagon over man, I think it will end up either being a wheeler or a parts car, has a little frame rot.... When I finish the bodywork on the EA82 Brat it will look like the Brat Subaru should have made on that platform, and yes, the coupe was the perfect starting point for it, what with the longer doors and more ridgid body structure. Ive been slowly doing work on it here and there, mainly because Robbie isnt always within quick driving distance and because Ive been busy trying to get my own rig back on the scene -Bill Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted August 21, 2009 Share Posted August 21, 2009 You should look into getting a Brat targa stripe made for it when its done Link to comment Share on other sites More sharing options...
subaruguru Posted August 21, 2009 Author Share Posted August 21, 2009 great minds think alike Junky bill and i have been doing ALOT of talking haha Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted August 21, 2009 Share Posted August 21, 2009 Is this thing gonna be at the WCSS?? Link to comment Share on other sites More sharing options...
subaruguru Posted August 21, 2009 Author Share Posted August 21, 2009 yes this BRAT will be at the WCSS its my only car haha Link to comment Share on other sites More sharing options...
TheLoyale Posted August 21, 2009 Share Posted August 21, 2009 Rob, Awesome!! Looks great pulling the wagon, "Thumbs up" is always sweet, makes ya feel good! after reading those specs you put up, I want an EJ now :-p So what left do you have to do on the sheet metel? Just paint? I would totaly do the Targa strip awell, Mick makes those Brat decals. Anyhoo awesome job, I've been wondering whats up with it since I havn't seen any thing new about it. -Tom Link to comment Share on other sites More sharing options...
The Beast I Drive Posted August 21, 2009 Share Posted August 21, 2009 Rob, Awesome!! Looks great pulling the wagon, "Thumbs up" is always sweet, makes ya feel good! after reading those specs you put up, I want an EJ now :-p So what left do you have to do on the sheet metel? Just paint? I would totaly do the Targa strip awell, Mick makes those Brat decals. Anyhoo awesome job, I've been wondering whats up with it since I havn't seen any thing new about it. -Tom The sheetmetal is LONG way from done, I still need to finish the back wall, build up the bed rails, and finish up the in-bed stuff, then modify the Gen 2 Brat bedtrim I have to fit it, and a few other things as well... The stripes will have to be custom, but shouldnt be much different than EA81 Brat stripes, although I might see if the font can be tweeked to be more like the 4wd emblem on the back of the EA82 wagons, just to be period correct -Bill Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now