marcelitros Posted September 1, 2009 Share Posted September 1, 2009 Since I'm getting in love with this forum and it's subaru lifting projects, I would like to present my monster-lifted 92'brat. I live in Chile, and in here there is no way to buy a factory lift kit, so I have to build it completely, and with no much information, so there is still a few wrong things that I expect to correct soon. It's a completely home made 10" lift, with 16" Nissan Rims. Here are some pics.... I hope you like it, and I would like to receive advices of the experts ones in here. (sorry if my english is not ok, but it's not my first language) Link to comment Share on other sites More sharing options...
Turbone Posted September 1, 2009 Share Posted September 1, 2009 Excellent work! I bet you will get a lot of comments with the only lifted Brat in Chile. Link to comment Share on other sites More sharing options...
monstaru Posted September 1, 2009 Share Posted September 1, 2009 just make sure you connect the rear to the front,and keep the rubber down!good work.cheers, brian Link to comment Share on other sites More sharing options...
marcelitros Posted September 1, 2009 Author Share Posted September 1, 2009 Thanks... I'll keep it in mind. I have huuuge problems with camber, because I made the inward correction but the top of the strut is touching the chassis and the camber is still bad, but I'm reading almost all the forum looking for the solution Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted September 1, 2009 Share Posted September 1, 2009 looks good plenty strong on the front strut extention tower shown below looks like its built straight if so this will cause the camber to be off the tops of the tires will tilt out, to correct this the extension needs to be built with angles on top and bottom , keep us posted Link to comment Share on other sites More sharing options...
ironworkerboomer Posted September 1, 2009 Share Posted September 1, 2009 Welcome, how many Subaru's are around there? Will you have problems with getting parts? Oh nice welds on the lift did you do it? Link to comment Share on other sites More sharing options...
marcelitros Posted September 1, 2009 Author Share Posted September 1, 2009 Thanks for the welding comments... I will tell that to my welding machine... It has the merit :lol: There is a lot of subarus in here, but the parts are not cheap... Sometimes you just want to cry... Indeed, I have the brat, and a 81 2wd leone GLF, and a 94 legacy turbo wagon (but I will not lift it... ) Link to comment Share on other sites More sharing options...
ironworkerboomer Posted September 1, 2009 Share Posted September 1, 2009 and a 94 legacy turbo wagon (but I will not lift it... ) Everyone says that at first:banana: Link to comment Share on other sites More sharing options...
marcelitros Posted September 1, 2009 Author Share Posted September 1, 2009 and a 94 legacy turbo wagon (but I will not lift it... ) Everyone says that at first:banana: :lol: Link to comment Share on other sites More sharing options...
marcelitros Posted September 2, 2009 Author Share Posted September 2, 2009 With the comments on this thread, and information gotten on the forum, I couldn't wait, so at least half of today was dedicated to correct camber on the brat. Definitely I didn't make the inward offset at first on strut towers, so I made that, but unfortunately the 15º (70mm over 250mm lift) correction couldn't be done because of the struts top was stucked on brat body. At least, the selected configuration was a 55mm offset, and extensions were shorten by 1/2", and I expect (really expect) that this should work. I must say that those good looking 1/4"+ wall-thick towers were a pain in the rump roast for modify. My grinder almost quit Here some pics... Frightfully incorrect camber: Incorrect vs correct extension: corrected and finished extensions: Corrected (or almost) camber: I hope with engine weight it will be fine. Welcome, how many Subaru's are around there? Will you have problems with getting parts? Oh nice welds on the lift did you do it? Since every one likes to hear good comments, here is a pic of today weldings. :lol: Upper one is a Mig welder, and the other is CC Arc. Maybe by the week end the engine will be installed, so I will be sending pics. Tomorrow I will only drink since it my birthday!! :grin: Link to comment Share on other sites More sharing options...
idosubaru Posted September 2, 2009 Share Posted September 2, 2009 woah, you're nuts!! (you'll fit right in!). indeed looks like good work and those are some great welds you obviously are good. my wife lived in Santiago, Chile for a few years so i've been there before. she's traveled most of the country all the way down to Torres Del Pines (you'll have to excuse my spanish as I don't really know any!). Looks like you're out in the middle of nowhere, would have loved to visit that kind of area while I was there. Santiago is HUGE and not many folks had cars (though I was hanging with all college students), much less any Subaru's, although I did walk past a Subaru dealer. Link to comment Share on other sites More sharing options...
marcelitros Posted September 2, 2009 Author Share Posted September 2, 2009 woah, you're nuts!! (you'll fit right in!). indeed looks like good work and those are some great welds you obviously are good. my wife lived in Santiago, Chile for a few years so i've been there before. she's traveled most of the country all the way down to Torres Del Pines (you'll have to excuse my spanish as I don't really know any!). Looks like you're out in the middle of nowhere, would have loved to visit that kind of area while I was there. Santiago is HUGE and not many folks had cars (though I was hanging with all college students), much less any Subaru's, although I did walk past a Subaru dealer. I'm glad you know Chile, is a very beauty place to live. Santiago is a huge place, but I don´t like it very much... I'm really in love with country areas. My place is around 70 miles away from Santiago and is a really nice place. Unfortunately I don't know Torres del Paine because it's 1500 miles away from here :-\ There is really too much subarus in here, from first 7x' leones, to new sti ... in fact, a friend bought a 2007 legacy 3.0R what a monster!! but I cannot convince him to lift it. :grin: Link to comment Share on other sites More sharing options...
P K Posted September 2, 2009 Share Posted September 2, 2009 Hola Marcelo, Welcome to the best Subaru resource on the net. Lifted Brats are very nice, especially the extreme ones like yours. My ex will be in Bolivia on Saturday, and I have always wanted to visit Valparaiso and Vina del Mar. I live in San Diego, California, which is about 32 degrees north of equator. Valparaiso is about 32 degrees south of equator, so both being right on the Pacific ocean, I would expect the climate to be the same. Just different beautiful people and food Anyways - welcome ! y su inglés es bueno! r/ Patricio Link to comment Share on other sites More sharing options...
marcelitros Posted September 3, 2009 Author Share Posted September 3, 2009 Finally I ride it!!! After a long work day I finally ride the monster-brat I stole the leone engine to put the brat alive, and definitely correct the camber problem, so It's all working... Here are the pics: A liitle flames from the engine Front view Camber detail And a video :slobber: Link to comment Share on other sites More sharing options...
michael appel Posted September 27, 2009 Share Posted September 27, 2009 could you show the rear lift Link to comment Share on other sites More sharing options...
deiti Posted November 8, 2009 Share Posted November 8, 2009 how did you do the front lift ?? Link to comment Share on other sites More sharing options...
Uberoo Posted November 8, 2009 Share Posted November 8, 2009 (edited) to the OP with that amount of lift why not install a divorce transfer case? get another engine crossmember,Set the engine/transmission in the stock location. Build subframe to mount transfercase.Then install a rear diff up front to drive the wheels.Then you have to figure out 3 driveshafts.rear,front,stubby(transmission to transfer case) benfits to this: actually have the gearing to turn the tires,and have a decent low range.Rather than slipping the clutch everywhere to get going,and having a underpowered slug of a car... divorced transfer cases can be found in nissan/datsun 720's, suzuki samurai's,etc... not sure if you even get those sort of rigs down there... also what size tires are those? Edited November 8, 2009 by Uberoo Link to comment Share on other sites More sharing options...
3eyedwagon Posted November 8, 2009 Share Posted November 8, 2009 ^ I'd leave homeboy alone. He lifted a Brat, and went huge. As in; didn't TALK about it..... DID it. He can probably figure out the rest on his own. Link to comment Share on other sites More sharing options...
Uberoo Posted November 8, 2009 Share Posted November 8, 2009 just a sugestion Link to comment Share on other sites More sharing options...
Redcap Posted November 8, 2009 Share Posted November 8, 2009 ^ i'd leave homeboy alone. He lifted a brat, and went huge. As in; didn't talk about it..... Did it. He can probably figure out the rest on his own. +1 Link to comment Share on other sites More sharing options...
monstaru Posted November 9, 2009 Share Posted November 9, 2009 ^ I'd leave homeboy alone. He lifted a Brat, and went huge. As in; didn't TALK about it..... DID it. He can probably figure out the rest on his own. +1 +seventy gazillion..... Link to comment Share on other sites More sharing options...
bobaru Posted November 9, 2009 Share Posted November 9, 2009 ^ I'd leave homeboy alone. He lifted a Brat, and went huge. As in; didn't TALK about it..... DID it. He can probably figure out the rest on his own. YES in fact why dont you put your tools where youre fingers are and do 1/4 of what he did NICE JOB.......... Marcelitros Link to comment Share on other sites More sharing options...
frogstar7055 Posted November 9, 2009 Share Posted November 9, 2009 Very cool and a good job as well. I love the fact that to do these things to a Subaru you gotta make,can't buy it off the shelf. Weld on Brother. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now