987687 Posted September 7, 2011 Share Posted September 7, 2011 well it depends on who owned them before i get them or ryan gets them. this xt has been a problem child so to speak from day one. alot of it was from previuos owner. and the xt was from new jersey. ryan bought the xt first then i got it from him. he fixed eletrical and mechincal issue. they stripped tensioner bolts for the timing belts. and instead of fixing it. the rewired the injectors to match instead of retiming it. :-\ and most of the older subarus here. are mostly fwd. and thats it. in NC. i dont think you will no where near the problems we do here. At least you don't have ea82 rear tubeframes rust so badly wheels almost fall off Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted September 7, 2011 Share Posted September 7, 2011 Finally: I Fixed the Age Old e-Brake Problem with my Wagon http://www.ultimatesubaru.org/forum/showthread.php?t=101883&page=7 Link to comment Share on other sites More sharing options...
rpholz Posted September 7, 2011 Share Posted September 7, 2011 well it depends on who owned them before i get them or ryan gets them. this xt has been a problem child so to speak from day one. alot of it was from previuos owner. and the xt was from new jersey. ryan bought the xt first then i got it from him. he fixed eletrical and mechincal issue. they stripped tensioner bolts for the timing belts. and instead of fixing it. the rewired the injectors to match instead of retiming it. :-\ and most of the older subarus here. are mostly fwd. and thats it. in NC. i dont think you will no where near the problems we do here. Oh the joy of finding that out when I got it home. all 4 injectors were wired to fire at once, but only wired into 1 pin on the ecu. Dude said it ran to:confused: Link to comment Share on other sites More sharing options...
dragonfire Posted September 8, 2011 Share Posted September 8, 2011 At least you don't have ea82 rear tubeframes rust so badly wheels almost fall off wow that is bad. damn. Link to comment Share on other sites More sharing options...
dragonfire Posted September 8, 2011 Share Posted September 8, 2011 Oh the joy of finding that out when I got it home. all 4 injectors were wired to fire at once, but only wired into 1 pin on the ecu. Dude said it ran to:confused: all fired at once. hmmm RPM automotive you suck!!! Link to comment Share on other sites More sharing options...
987687 Posted September 8, 2011 Share Posted September 8, 2011 wow that is bad. damn. Since they all rust it took me a month to get a good one. Rust up here is evil. Link to comment Share on other sites More sharing options...
rpholz Posted September 8, 2011 Share Posted September 8, 2011 Since they all rust it took me a month to get a good one.Rust up here is evil. I swear there is an open recall on that part. or some subframe part. Link to comment Share on other sites More sharing options...
Greenley Posted September 8, 2011 Share Posted September 8, 2011 Got the lifted '84 wagon running with a beastly 1987 49-states EA81 engine. Addressed the ridiculous amount of vacuum leaks/3k idle. Power mirror rewiring (pups, uggg) New radiator and a really nice dual electric fan set to a switch. Got the third eye wired up to the stock switch. Ready for tabs! i'm stoked, as she was rode hard and put away filthy, years ago. Link to comment Share on other sites More sharing options...
subynut Posted September 11, 2011 Share Posted September 11, 2011 Replaced an axle, replaced the rear view mirror, relocated the fuel filter to a better spot, cleaned up a little wiring, and cleaned the undercarriage on my blue wagon. Still need to do rear struts and the heater core. Link to comment Share on other sites More sharing options...
xbeerd Posted September 11, 2011 Share Posted September 11, 2011 Dropped my front crossmember using cut down stock spacers from a 2000 outback Link to comment Share on other sites More sharing options...
TheLoyale Posted September 11, 2011 Share Posted September 11, 2011 When is there going to be a "What Have You Done to you Toyota lately?" thread? I think we are in need on one in the "Non-Subaru Vehicles Section" Link to comment Share on other sites More sharing options...
xbeerd Posted September 11, 2011 Share Posted September 11, 2011 why dont you start one if you want one? oh. i was gonna reply to the above.. but just a heads up wisconsin technically does require both plates to be displayed. its section 341.15 most of the time no one is gonna care, unless they are lookin for something else. i've been stopped twice for not havin a front plate. 341.15 Display of registration plates.341.15(1) (1) Whenever 2 registration plates are issued for a vehicle, one plate shall be attached to the front and one to the rear of the vehicle. Whenever only one registration plate is issued for a vehicle, the plate shall be attached as follows: 341.15(1)(a) (a) If the vehicle is a truck tractor or road tractor or a motor truck issued the plate under s. 341.405 (2), to the front. 341.15(1)( ( For any other vehicle for which only one plate is issued, to the rear, except that a plate issued to or for a municipality under s. 341.26 (2m) may be attached to the front of the vehicle if the design or use of the vehicle is such as to make a plate attached to the rear difficult to see and read. 341.15(1m) (1m) 341.15(1m)(a)(a) Except as provided in par. (, any registration decal or tag issued by the department shall be placed on the rear registration plate of the vehicle in the manner directed by the department. 341.15(1m)( ( Any registration decal or tag issued by the department for a truck tractor, road tractor or motor truck under sub. (1) (a) or for any other vehicle which may bear a registration plate attached to the front as provided in sub. (1) ( shall be placed on the front registration plate of the vehicle in the manner directed by the department. 341.15(2) (2) Registration plates shall be attached firmly and rigidly in a horizontal position and conspicuous place. The plates shall at all times be maintained in a legible condition and shall be so displayed that they can be readily and distinctly seen and read. Any peace officer may require the operator of any vehicle on which plates are not properly displayed to display such plates as required by this section. 341.15(3) (3) Any of the following may be required to forfeit not more than $200: 341.15(3)(a) (a) A person who operates a vehicle for which a current registration plate, insert tag, decal or other evidence of registration has been issued without such plate, tag, decal or other evidence of registration being attached to the vehicle, except when such vehicle is being operated pursuant to a temporary operation permit or plate; 341.15(3)( ( A person who operates a vehicle with a registration plate attached in a non-rigid or non-horizontal manner or in an inconspicuous place so as to make it difficult to see and read the plate; 341.15(3)© © A person who operates a vehicle with a registration plate in an illegible condition due to the accumulation of dirt or other foreign matter. 341.15 History History: 1971 c. 278; 1981 c. 150; 1983 a. 258; 1985 a. 29; 1991 a. 239; 1993 a. 64; 1995 a. 128. 341.15 AnnotationThis section is applicable to temporary plates under s. 341.09. U.S. v. Dexter, 165 F.3d 1120 (1999). Link to comment Share on other sites More sharing options...
TheLoyale Posted September 11, 2011 Share Posted September 11, 2011 *Cough* you also drive around in Milwaukee where cops seem more strict, out in Waukesha CO. nobody cares, TW10 is a moving violation as it sits anyway Lol! why dont you start one if you want one? oh. i was gonna reply to the above.. but just a heads up wisconsin technically does require both plates to be displayed. its section 341.15 most of the time no one is gonna care, unless they are lookin for something else. i've been stopped twice for not havin a front plate. Link to comment Share on other sites More sharing options...
Turbone Posted September 11, 2011 Share Posted September 11, 2011 When is there going to be a "What Have You Done to you Toyota lately?" thread? I think we are in need on one in the "Non-Subaru Vehicles Section" How about starting one in a Toyota forum? Link to comment Share on other sites More sharing options...
SoobDood05 Posted September 11, 2011 Share Posted September 11, 2011 Made a bit of Progress with the ol loyale wagon.. I replaced a broken headlight lense assenbly with one from pick n pull, Bought a new EGR vacuum solenoid and replaced it, also put in a new temperature sending unit and flushed the radiator, Sanded some surface rust and primer-ed it, bought a new water pump today.. that is going on tomorrow:) Link to comment Share on other sites More sharing options...
xbeerd Posted September 11, 2011 Share Posted September 11, 2011 *Cough* you also drive around in Milwaukee where cops seem more strict, out in Waukesha CO. nobody cares, TW10 is a moving violation as it sits anyway Lol! One was halfway to Madison in the middle of nowhere in the middle of the day Outback spacees fit but the outback hardware is just slightly larger than the EA hardware. Doh. Just got new hardware. It'll do till I can get right sized grade 8 Link to comment Share on other sites More sharing options...
Turbone Posted September 11, 2011 Share Posted September 11, 2011 Finally got the trans in my SVX, its only taken 2yrs Now to install the timing belt kit and waterpump and drop the engine in. Link to comment Share on other sites More sharing options...
xbeerd Posted September 11, 2011 Share Posted September 11, 2011 (edited) Made a new pitchbar for the lowered x-member. Welding could be bter but eh, who cares driving the car with the crossmember lowered made a huge difference, since my suspension is kinda mushy, when i got on the gas the front end lifts up a bit from the ej25 torque and once i hit like 3000 rpms the power just wasnt there. well.. my axles were stretched out to the max. (already ripped a boot on my new F'in axle!; pre blocks) the outback lift blocks lowered the crossmember probably like 1-1.25". the steering joint i used was from a 98 impreza, but the alignment holes were different so i had to pull my steering wheel and aim it right. Edited September 12, 2011 by xbeerd Link to comment Share on other sites More sharing options...
bheinen74 Posted September 11, 2011 Share Posted September 11, 2011 got a nice thing for my BRAT in the back. Link to comment Share on other sites More sharing options...
newsoobdude Posted September 12, 2011 Share Posted September 12, 2011 Well, after 2 days 850 miles, 2 hours sleep and a lot of waiting around, O finally got one of my BRATs down to LA to work on. Cannot wait til I get new keys and registration for it so I can fix it back up. Also, put another dent in my Outback out wheeling the other day, just glad I was lifted as it was my rocker that got it and had I not been lifted would have gottten stuck. time for bed Link to comment Share on other sites More sharing options...
SubaruJawn Posted September 12, 2011 Share Posted September 12, 2011 today found an XT6 in the weeds, sat 10+ years ( i was like 15 ) Pics: Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted September 12, 2011 Share Posted September 12, 2011 Holy Cow! Why? ... Broken Timin' Belts? Do you wanna buy it? ... seems to be a Fun restoration Project. Link to comment Share on other sites More sharing options...
TheLoyale Posted September 13, 2011 Share Posted September 13, 2011 Holy Cow! Why? ... Broken Timin' Belts? Do you wanna buy it? ... seems to be a Fun restoration Project. Chances are the floorboard is now like swiss cheese (Or will be once you sit in it) Midwest/east coast is hard on these uni-bodies for sure. Doesn't look to have a hood, I wonder whats grown around the motor lol... Link to comment Share on other sites More sharing options...
SubaruJawn Posted September 13, 2011 Share Posted September 13, 2011 (edited) my timing belts are fine. the hood is there just not on. only the engine block plus the internals are there. i found out who owned it and gonna try to get a hold of him to see if he'll get rid of it. i want to buy it for the good parts that are on it. Less than 5 miles away from me. Edited September 13, 2011 by SubaruJawn Link to comment Share on other sites More sharing options...
Skysm182 Posted September 13, 2011 Share Posted September 13, 2011 just got done installing the nearly brand-new radiator i got from pick n pull over the weekend. also got the brackets to delete my a/c and uninstalled that stuff since it didn't work. It really cleaned up the engine compartment. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now