wagonist Posted June 4, 2016 Share Posted June 4, 2016 The Loyale, the new arch piece you welded in. Was that a new from Subaru, or new aftermarket piece? Link to comment Share on other sites More sharing options...
Len Dawg Posted June 8, 2016 Share Posted June 8, 2016 1993 loyale wagon 4wd ea 82 Passenger front New Balljoint and New Axle.. got parts from orielys $import direct$..59.00 for the axle 14.00 for the balljoint. . everything went as planned.. one hick up ..the axle to the output shaft, the pin hole didn't line up.. oldtimer submehanic that did my clutch gave me a pointer a few years ago... if it don't go in easy you'll have to flip it 180 degrees because they are offset just a smige; ) reman radiator new oem thermostat and hoses Goodtimes! 276,730 fun luving miles and still rolling.. Link to comment Share on other sites More sharing options...
Len Dawg Posted June 8, 2016 Share Posted June 8, 2016 oh yeah I forgot to mention new driver side headlamp driver side ball joint intake boot and whule was at the wrecking yard getting those parts headlamp intake boot found some brrrand new brake shoes!woohoo! Link to comment Share on other sites More sharing options...
Saturn5rocket Posted June 12, 2016 Share Posted June 12, 2016 (edited) Final stages at my attempt at restoring by '84 Brat dashboard. It's far from perfect, but it's a huge improvement Edited June 12, 2016 by Saturn5rocket 1 Link to comment Share on other sites More sharing options...
superpoo93 Posted June 15, 2016 Share Posted June 15, 2016 (edited) Just installed my Pugs!!! It does look sweet ???? No lift yet :-/ Went with 185/65/15 tires. Time to get on the D/R install Edit:spelling error Edited June 15, 2016 by superpoo93 1 Link to comment Share on other sites More sharing options...
Dinky26 Posted June 16, 2016 Share Posted June 16, 2016 Final stages at my attempt at restoring by '84 Brat dashboard. It's far from perfect, but it's a huge improvement Looks good. I bet that was a challenge to get out. Link to comment Share on other sites More sharing options...
Saturn5rocket Posted June 25, 2016 Share Posted June 25, 2016 Looks good. I bet that was a challenge to get out. Yes, it was a pain. Link to comment Share on other sites More sharing options...
superooo Posted June 26, 2016 Share Posted June 26, 2016 Front axles and wheel bearings/seals, clutch and cable, rotors and pads and shoes and drums all around, leather front seats(crazy j/y find), carpet from an 81 wagon, ztill needs a lil trim to fit better, and im trying to come up with a Frankenstein back seat, new plugs and wires, newish stereo and speakers but still need a slanted bezel from a brat, picking up discs for the rear from a wagon tomorrow, picked up a nearly perfect dash and glove box with the mirror option, thats cool, looking for some pugs and a d/r 5 spd, prepping my spfi for install, kinda stuck on wiring tho.. this page is way cool tho Link to comment Share on other sites More sharing options...
Jmpjose Posted June 27, 2016 Share Posted June 27, 2016 I installed a new fm radio cluster and antenna on my 1979 suabru dl. Looking good 2 Link to comment Share on other sites More sharing options...
Len Dawg Posted July 9, 2016 Share Posted July 9, 2016 Got some new tires... $335.00... r13's yeay if ya know what I mean.. Goodtimes! Link to comment Share on other sites More sharing options...
SockRx Posted July 9, 2016 Share Posted July 9, 2016 Bought a 88 Rx running and driving leaks a ton of oil and clutch was just slipping so I pulled the motor going to do head gaskets timing belts and all the seals the passenger side qp is pretty bad but I have my eye on another to get as a parts car 2 Link to comment Share on other sites More sharing options...
Len Dawg Posted July 21, 2016 Share Posted July 21, 2016 (edited) Installed Front crank seal, also called a Timing Seal Cover? Lol! Never heard of it.. and a brand new pcv valve, Mickey mouse gasket, o ring, shaft seal... i tried my old supposed working oil pump when removed... because the one i took out had the pressed belt guide fall off..but the TOD was! Everywhere!... i elected to scavenge the gear from the old one and put the one I took out back in.. not as much shaft end play I may or may not put the o2 sensor in.. got's ta wash the pipes of oil.. next up luxury items... rear passenger window switch, power door lock, stereo... Edited July 21, 2016 by Len Dawg Link to comment Share on other sites More sharing options...
Letters909 Posted July 21, 2016 Share Posted July 21, 2016 Changing all of the fuids today on my new GL, and tomorrow I do the brakes. Quick question as well when I was looking through the car I found a new oil filter but when I took the old one off it was a bit longer than my new one. The new one will thread on but I was just curious if it would have a huge effect on the cars performance Link to comment Share on other sites More sharing options...
Len Dawg Posted July 23, 2016 Share Posted July 23, 2016 I wouldn't think performance wise, if anything it will hold less of the valuable oil we eventually leak Link to comment Share on other sites More sharing options...
machineit Posted July 24, 2016 Share Posted July 24, 2016 Got the blocks in today, strut towers last week, next is shift linkage pad, steering length, in order Moog cc248 springs for the rear, all in good fun and with help from the great folks in here, ???? 1 Link to comment Share on other sites More sharing options...
machineit Posted July 24, 2016 Share Posted July 24, 2016 Got the blocks in today, strut towers last week, next is shift linkage pad, steering length, in order Moog cc248 springs for the rear, all in good fun and with help from the great folks in here, ???? Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted July 24, 2016 Share Posted July 24, 2016 Used the Subaru buggy hooked to the utility trailer to move stuff from around the shop 1 Link to comment Share on other sites More sharing options...
wagonist Posted September 6, 2016 Share Posted September 6, 2016 (edited) So my parts car got a temporary shoe upgrade... Edited September 6, 2016 by wagonist 1 Link to comment Share on other sites More sharing options...
iceageg Posted September 6, 2016 Share Posted September 6, 2016 Bought it. 86' GL hatch. Hope to be updating this thread regularly. It's good to be back in a subie again. Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted September 6, 2016 Share Posted September 6, 2016 Bought it. 86' GL hatch... Photos, please! we love subaru photos here. So my parts car got a temporary shoe upgrade... I spy a 4X114.3 lug pattern redrill! Link to comment Share on other sites More sharing options...
TomRhere Posted September 6, 2016 Share Posted September 6, 2016 So my parts car got a temporary shoe upgrade... That's one sweet looking "Parts car". Link to comment Share on other sites More sharing options...
wagonist Posted September 8, 2016 Share Posted September 8, 2016 haha. It'll prob get rebuilt as something of a lesser spec. Already got the typical BHG... I want to steal the running gear, wiring, etc out of it for my project car Link to comment Share on other sites More sharing options...
machineit Posted September 14, 2016 Share Posted September 14, 2016 Mechanically done, now for some sound, new windshield and snow. 1 Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted September 14, 2016 Share Posted September 14, 2016 got new tires installed on the WRX yesterday (Kumho ECSTA 4X II) after work - ordered them from DT last week to get a $75 Labor Day rebate. Link to comment Share on other sites More sharing options...
alexbuoy Posted September 14, 2016 Share Posted September 14, 2016 wheeled him to hard in Azusa Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now