TheLoyale Posted October 24, 2010 Share Posted October 24, 2010 I think it would be about a 1/2" bit. What size drill bit did you use for that, I have a set of 6 lug Calmasters that I want to use, just haven't really tried to find the right bit size. Link to comment Share on other sites More sharing options...
Subruise Posted October 24, 2010 Share Posted October 24, 2010 I think it would be about a 1/2" bit. yup, half inch bit/craftsman 19.2 volt cordless drill/ 3 fully charged batteries. RV Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted October 24, 2010 Share Posted October 24, 2010 I'll Like to see Pics of your Subie with those Montero's Rims! Kind Regards. Link to comment Share on other sites More sharing options...
Subruise Posted October 24, 2010 Share Posted October 24, 2010 I'll Like to see Pics of your Subie with those Montero's Rims! Kind Regards. im hopin to have it done this weekend. hopefully i can fall asleep soon, its like subie christmas for me:rolleyes: ive gotta find a die grinder or put slots in a lugnut so i can wedge out the holes. white steelies w beauty rings zzz:drunk: Link to comment Share on other sites More sharing options...
LeoneTurbo Posted October 24, 2010 Share Posted October 24, 2010 I just finished the assembly of the adjustable top mounts for my EA81 wagon. I bought a set of new strut tops off Yahoo! Japan Auction, had new plates cut for my EA81 and this is the result: Link to comment Share on other sites More sharing options...
SubaruWagon87 Posted October 25, 2010 Share Posted October 25, 2010 Yesterday, I went with Robbie and pulled a complete set of struts, a radiator, headlights, a grill, and gas shocks for the rear hatch. And today I went and picked up my spare rear diff & mustache bar, and my 6 lug pathfinder rims. It's slowly coming together! Link to comment Share on other sites More sharing options...
Mechanical_misfit Posted October 25, 2010 Share Posted October 25, 2010 made the trip from Muskegon to Hillsdale to pick up parts for my rusty `86 wagon. A big thanks to TomRhere for the help and the hookup on 4 decent doors, a non-broken rear bumper, and a working stock radio! Also, messed with a cellphone camera while fueling up! I like this picture, it looks like its from back when this car was still new. Link to comment Share on other sites More sharing options...
kanurys Posted October 25, 2010 Share Posted October 25, 2010 yup, half inch bit/craftsman 19.2 volt cordless drill/ 3 fully charged batteries. RV I have 5 montero rims. I think I will drill them out soon. 1/2 inch bit, hu? I'll probably bevel the edges with 2 sizes bigger... Let us know what you use. Link to comment Share on other sites More sharing options...
Subruise Posted October 25, 2010 Share Posted October 25, 2010 I have 5 montero rims. I think I will drill them out soon. 1/2 inch bit, hu? I'll probably bevel the edges with 2 sizes bigger... Let us know what you use. scott (SJR) said to use 60 degree bevel on the re-drilled holes. i like how the tires dont stick way out Link to comment Share on other sites More sharing options...
Ricearu Posted October 25, 2010 Author Share Posted October 25, 2010 I like this picture, it looks like its from back when this car was still new. I too like the old look it has to it. Nice shot. Link to comment Share on other sites More sharing options...
Subruise Posted October 26, 2010 Share Posted October 26, 2010 heres a shot in the dark (no pun) i have yet to bevel the holes but i got 95% of the "trimming" (sawzall and drywall hammer/wooden dolly done) still need new front liftblocks w correct camber (anybody wanna cut me some 2x2 square?) but its rolling again now. these wheels tuck under nicely, ill put up more pics when im done and its nice(er)/ brighter outside. also has 4w discs now. RV Link to comment Share on other sites More sharing options...
JRD Posted October 26, 2010 Share Posted October 26, 2010 I have changed the engine, messed with the carb, messed with the exhaust, changed the ignition, getting ready to change the engine and tranny (again). Maybe some day I will actually get to drive the thing! I've only driven it to where it sits now in the garage waiting for me to get the time to work on her again. Poor car! Link to comment Share on other sites More sharing options...
phantomD Posted October 26, 2010 Share Posted October 26, 2010 I have changed the engine, messed with the carb, messed with the exhaust, changed the ignition, getting ready to change the engine and tranny (again). Maybe some day I will actually get to drive the thing! I've only driven it to where it sits now in the garage waiting for me to get the time to work on her again. Poor car! I'm the opposite, I'm putting plenty of K's on my car and wondering when I'll be able to fit the treasure trove of items sitting in my spare room! Link to comment Share on other sites More sharing options...
thatswhatshesaid Posted October 26, 2010 Share Posted October 26, 2010 Lately...I drove ~200 miles one way to pick up a SVX motor to swap into my Outback this weekend! I must be nuts. Link to comment Share on other sites More sharing options...
superu Posted October 26, 2010 Share Posted October 26, 2010 I am eager to see that build and hear its final performance characteristics. I've been dreaming of an H-6 swap since I ran into a SUPER CLEAN 94 SVX with 94K miles on it in a junk yard last fall... Lately...I drove ~200 miles one way to pick up a SVX motor to swap into my Outback this weekend! I must be nuts. Link to comment Share on other sites More sharing options...
thatswhatshesaid Posted October 26, 2010 Share Posted October 26, 2010 You've been around longer than me, superu. ha ha. You should do the swap. We'll compare notes along the way. You're probably more competent than I am. Link to comment Share on other sites More sharing options...
JRD Posted October 26, 2010 Share Posted October 26, 2010 I'm the opposite, I'm putting plenty of K's on my car and wondering when I'll be able to fit the treasure trove of items sitting in my spare room! I wish I was having the same problem you are. Soon I will be! Cheers! Link to comment Share on other sites More sharing options...
Twitch de la Brat Posted October 27, 2010 Share Posted October 27, 2010 Well while thatswhatshesaid is putting a 6 cylinder in his car, I'm gonna be putting in the clutch from a 6 cylinder XT6 clutch FTW! Yes siree I'm dropping an XT6 clutch into my 5sp d/r swapped brat, because my used jy clutch is SATH. It slips in first gear So anyway, I'll be pulling the engine and getting the flywheel resurfaced this week. Oh, and does anybody have any suggestions on where to get a disty seal? Mine is leaking underneath the disty. Twitch Link to comment Share on other sites More sharing options...
thatswhatshesaid Posted October 27, 2010 Share Posted October 27, 2010 I wish I had a clutch... Link to comment Share on other sites More sharing options...
superu Posted October 28, 2010 Share Posted October 28, 2010 I agree I should do the swap, but see, you have the motor You've been around longer than me, superu. ha ha. You should do the swap. We'll compare notes along the way. You're probably more competent than I am. Link to comment Share on other sites More sharing options...
thatswhatshesaid Posted October 28, 2010 Share Posted October 28, 2010 I agree I should do the swap, but see, you have the motor Go find one! They're dirt cheap! Come on...you're a veteran around here. It's time. Link to comment Share on other sites More sharing options...
vagen Posted October 29, 2010 Share Posted October 29, 2010 today I discovered 23 offset pugs with 225/45/15 tires do NOT fit under stock fenders at ALL. Link to comment Share on other sites More sharing options...
TheLoyale Posted October 29, 2010 Share Posted October 29, 2010 You need to to some wicked camber like the JDM guys Lol... Yeah thats a close shave. Looks cool though, I bet 225s would have fit. Link to comment Share on other sites More sharing options...
Subruise Posted October 29, 2010 Share Posted October 29, 2010 those are 225s Link to comment Share on other sites More sharing options...
TheLoyale Posted October 29, 2010 Share Posted October 29, 2010 Whoops, thought it side 245! Well then what 215s or 205s? Dunno what kind of sport tires your gonna find in that width? those are 225s Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now