Twitch de la Brat Posted December 30, 2010 Share Posted December 30, 2010 I have determined that I have neglected mine. And that the valves on my friend's car are hosed on one cylinder. So I tried to fix, found out it was beyond what I wanted to fight with and beyond what she wanted to fork out. Twitch PS: Said friend's car is for sale in the Classifieds. Link to comment Share on other sites More sharing options...
bheinen74 Posted December 30, 2010 Share Posted December 30, 2010 installed Timing Belt kit on the BAJA which i have for sale. Link to comment Share on other sites More sharing options...
beataru Posted December 31, 2010 Share Posted December 31, 2010 installed Timing Belt kit on the BAJA which i have for sale. I give you 100 bucks for it Plus my broken GL-10, its an offer that you cant refuse! Link to comment Share on other sites More sharing options...
darsdoug Posted December 31, 2010 Share Posted December 31, 2010 That is a great idea! wow, Will have to see how it holds up (I dont have a rust problem in my main brat (Texas) but my trailer brat is rusted bad..., I will try this... Where did you get the vinyl? -Daniel I got the vinyl from a friend but you can probably get it at one of those large home improvemnt store's. You want the rigid stuff that you can hardly bend. That's what I used anyhow. I made the template with a piece of old newspaper. Traced the outline onto the vinyl with a laundry pen and cut the vinyl with large scissor's. I used a few of those short self tapping screws to hold it in place while the glue dried. Link to comment Share on other sites More sharing options...
mudER wagon Posted December 31, 2010 Share Posted December 31, 2010 got another set of lights for christmas!! Link to comment Share on other sites More sharing options...
b88185 Posted December 31, 2010 Share Posted December 31, 2010 Rolling on mismatched wheels, courtesy Miles Fox (but at least it's rolling! ) Link to comment Share on other sites More sharing options...
88 EA82T Posted January 1, 2011 Share Posted January 1, 2011 Fixed two things in one day so it was a good way to close out 2010. Finally replaced my hood release cable so I could put my grill back on after the cable broke 4 months ago. Then pulled the rear window wiper motor and regreased it. I have never seen the rear window wiper move so fast before!!! Link to comment Share on other sites More sharing options...
TheLoyale Posted January 1, 2011 Share Posted January 1, 2011 Changed Oil and ATF in my Loyale yesterday. Link to comment Share on other sites More sharing options...
beataru Posted January 4, 2011 Share Posted January 4, 2011 I gots my tranny semi Bolted in. Now to make tranny mounts, have a drive shaft made, and put in a new rear diff. Link to comment Share on other sites More sharing options...
hanyou Posted January 4, 2011 Share Posted January 4, 2011 Put a new Dual radio/cd player into the Brat to replace a Pioneer cassette player that wasnt hooked up when I bought it. Realized later that the red acc cable wasnt acc as in amp or subs, but has to be tied to ignition or whatnot Bought some Rustoleum bedliner as a preventative measure against rust but its too cold to put it on at the moment.. was happy to see someone had sprayed an undercoat of the same stuff around the wheel wells, no cancer in this one ^^ Had to sand and spray the metal skid plate for the bed though, now is nice and shiny black. Link to comment Share on other sites More sharing options...
LanceDa Posted January 4, 2011 Share Posted January 4, 2011 I got the headgasket finished on my wifes 99 OBW. First time doing it. Besides some setback, I found it to be relatively easy. Now I am looking for another 2.5 to rebuild and put in my Forester. I think I am hooked on semi-rebuilding engines. -Lance Link to comment Share on other sites More sharing options...
Idaho_Dirtball Posted January 4, 2011 Share Posted January 4, 2011 I welded up a leak in my dual exhaust that was right in front of the glass pack. Did a horrible weld job but hey the bigger the glob the better the job. Also put some walmart high tech seat covers on. But I think my tranny is on its last leg. Link to comment Share on other sites More sharing options...
1982gl4 Posted January 4, 2011 Share Posted January 4, 2011 A lot! rear five lug on my brat, refinished alloys for it, working on the subframe right now tying to get ea82 control arms to fit it, got an AWD trans, got the franken motor somewhat together (still need to do the timing belt and bolt the intake on) I also had to change my radiator hoses on my 92 legacy after I had a bit of a steamy mess one night. (I probably should change them before they explode next time ) Link to comment Share on other sites More sharing options...
stephen115 Posted January 5, 2011 Share Posted January 5, 2011 cherry bomb exhaust is on!! will post video soon. SJ Link to comment Share on other sites More sharing options...
nipper Posted January 6, 2011 Share Posted January 6, 2011 Does starting him count? Justy sat for 2 months in bitter cold weather and a blizzard. Took more cranks then i expected but it ran fine except idle is 1500 RPM. Link to comment Share on other sites More sharing options...
ghost Posted January 6, 2011 Share Posted January 6, 2011 Broke mine in a bit. Took it for the longest drive ive done since i got it. Ran good the whole time. Also ordered new hatch lift supports and arranged my tools(my hydraulic jack, tow strap AND 25 ft jumper cables fit nicely in the floor compartment ). Also put my 15" sub in the back, just waiting to find an install kit to put in one of my spare radios and wire up the amp. Link to comment Share on other sites More sharing options...
1982gl4 Posted January 6, 2011 Share Posted January 6, 2011 Finished instaling the ea82 control arm mounts on my ea81 subframe! Five lug and legacy brakes here we come! Link to comment Share on other sites More sharing options...
kanurys Posted January 6, 2011 Share Posted January 6, 2011 I changed the oil and filter (10w30 Valvoline synth and scoob filter) on the 87 GL. It really likes the slippery stuff. Also, the legacy outback has a new driver's side heated power mirror on it's way in the mail, so I took the door apart and popped off the broken one preemptively. Now to fix this dang computer. Link to comment Share on other sites More sharing options...
987687 Posted January 6, 2011 Share Posted January 6, 2011 Replaced the left outer and inner tie rod ends in my legacy. It better pass inspection now Link to comment Share on other sites More sharing options...
87glsubie Posted January 7, 2011 Share Posted January 7, 2011 my buddy had some dual blade wipers for his rig but they were the wrong size so i modified my wiper clips to fit em. work pretty damn good Link to comment Share on other sites More sharing options...
bheinen74 Posted January 7, 2011 Share Posted January 7, 2011 my buddy had some dual blade wipers for his rig but they were the wrong size so i modified my wiper clips to fit em. work pretty damn good dual blades cause lots more strain on the wiper motor and over time will cut its life short. too much friction with the extra blade. be careful with that type mod. you can read up on this on the google. Link to comment Share on other sites More sharing options...
aaronxs400 Posted January 7, 2011 Share Posted January 7, 2011 changed plugs, wires, cap and rotor, new alternator, removed PS and AC belts, ordered new lift supports, changed fuel filter in engine compartment, need to change other fuel filter by fuel pump. Link to comment Share on other sites More sharing options...
PlaneDriver Posted January 8, 2011 Share Posted January 8, 2011 Last weekend I replaced the transmission and diff fluid in my RX with Redline 75W90NS. While under the car I noticed the outer right front CV boot had cracked so I had that replaced today. Since I had a coupon for a free oil change from the shop I use, I figured I would let them do that too. I need to address to oil leaks at the front of the engine sometime. It will have to be after this semester, at least. Link to comment Share on other sites More sharing options...
The Dude Abides Posted January 8, 2011 Share Posted January 8, 2011 Drove it to work today. God i miss driving that car. Need to figure out that heat someday. Link to comment Share on other sites More sharing options...
PA-Brat Posted January 8, 2011 Share Posted January 8, 2011 Patched the cracked dash and covered with some leftover thin carpet. Filled the missing vents with a bit of sky! Still needs a bit of work to cover the cracks in the visible edges Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now