beataru Posted May 5, 2011 Share Posted May 5, 2011 Custom Transmission mounts... Check. Painted... Check... Rear Diff..... not yet, Custom Drive Shaft... Not done yet... Custom Shift linkage... im afraid to begin... Some day, it will move again. Link to comment Share on other sites More sharing options...
mcbrat Posted May 5, 2011 Share Posted May 5, 2011 Yeah, what mods have you done? Looks like you may have a Nissan 4x4 setup? EJ power as well to turn those big meats? You guys really need to get out. The development of this brat has been covered in detail. Search on that. It goes without saying that we all love the work that has been done. Oh yeah, I washed the mud off of the GL and fixed the sinking mirror on my outback. yeah, all documented in the Off Road section... No Nissan stuff though... Subaru Toyota Suzuki Jeep Lots 'o Custom stuff.... Link to comment Share on other sites More sharing options...
TheLoyale Posted May 5, 2011 Share Posted May 5, 2011 Yeah, that would be "Scott In Bellingham" which ran some Nissan stuff, Center diff etc.. The Brat is looking insane there, please tell me you DO drive it to work now and then! Link to comment Share on other sites More sharing options...
GirlWithALegacy Posted May 5, 2011 Share Posted May 5, 2011 new tires. Subaru pron! Link to comment Share on other sites More sharing options...
bheinen74 Posted May 5, 2011 Share Posted May 5, 2011 Is that latest photo on Wiki or Google yet? :slobber: Link to comment Share on other sites More sharing options...
mcbrat Posted May 5, 2011 Share Posted May 5, 2011 The Brat is looking insane there, please tell me you DO drive it to work now and then! once I fix my leaking rear axle, it will make an appearance at work perhaps... it's 27 miles one way... maybe I should get some earplugs Link to comment Share on other sites More sharing options...
TheLoyale Posted May 5, 2011 Share Posted May 5, 2011 once I fix my leaking rear axle, it will make an appearance at work perhaps...it's 27 miles one way... maybe I should get some earplugs No, just turn the radio up. You may need some Double Coil subs though LOL! Link to comment Share on other sites More sharing options...
92_rugby_subie Posted May 5, 2011 Share Posted May 5, 2011 Washed, waxed and hung out with Ned today. Got his license plate straightened out a bit, and made sure he was super clean. Before: Waiting on the wax to dry: After: I went ahead and rinsed it off after a little bit because after I took the wax off, I had to mow the lawn, and I figured it would have dust on it lol. Link to comment Share on other sites More sharing options...
TheLoyale Posted May 7, 2011 Share Posted May 7, 2011 Helped jboy finish listing his Legacy via Outback struts. Looks better now! Link to comment Share on other sites More sharing options...
kanurys Posted May 7, 2011 Share Posted May 7, 2011 I installed new o2 sensors in the legacy outback. CEL is now gone. I cleared it with the obd 2 bluetooth adapter and my Android phone. Best investment ever. Link to comment Share on other sites More sharing options...
TheLoyale Posted May 7, 2011 Share Posted May 7, 2011 I installed new o2 sensors in the legacy outback. CEL is now gone. I cleared it with the obd 2 bluetooth adapter and my Android phone. Best investment ever. +1 to that! Those are pretty spiffy! Link to comment Share on other sites More sharing options...
The Dude Abides Posted May 7, 2011 Share Posted May 7, 2011 (edited) Been doing a couple projects the last couple weekends. Installed the lights but havent wired them up yet. Worked on the passenger side valve cover today with my pit crew. Ive got to tell you, that thing was bad and has lead probally to most of the oil on the engine and surrounding areas. The passanger side is going to be more difficult because of the ac compressor is in the way. Wisconson might have the alliance but I have the Girls of Subaru. Even though im not quite sure why the car wont run for crap at this point, ill figure it out when mom comes home and i can take it for a drive. For your enjoyment. Edited May 7, 2011 by The Dude Abides Link to comment Share on other sites More sharing options...
1-3-2-4 Posted May 7, 2011 Share Posted May 7, 2011 Finally got that ^&%^$& rusted hitch off my outback! I took the sawzall on it and it was painless! Link to comment Share on other sites More sharing options...
1982gl4 Posted May 7, 2011 Share Posted May 7, 2011 Did this to my 92 lego today Went to a pick n' pull and picked that out of a forester today got that and some other parts for $50! I put the stereo in today as well. I had that kicking around in another car. Link to comment Share on other sites More sharing options...
Idasho Posted May 8, 2011 Share Posted May 8, 2011 Nice :cool: Link to comment Share on other sites More sharing options...
TheLoyale Posted May 8, 2011 Share Posted May 8, 2011 Did this to my 92 lego today Went to a pick n' pull and picked that out of a forester today got that and some other parts for $50! I put the stereo in today as well. I had that kicking around in another car. That Nav system cam out of a Forester? I so want one. Link to comment Share on other sites More sharing options...
1982gl4 Posted May 8, 2011 Share Posted May 8, 2011 That Nav system cam out of a Forester? I so want one. Yeah this one did, it was mounted on top of the dash in place of the compartment that's usually there, I have seen them on a few 2.5 rs's as well but they are a rarity. This is the 4th one I have ever seen. I think it was a dealer installed option. They are very easy to wire up, if you do find one just don't forget to get the temp sensor behind the grill for the out door temp!!!!! Link to comment Share on other sites More sharing options...
jboymechanic Posted May 8, 2011 Share Posted May 8, 2011 Helped jboy finish listing his Legacy via Outback struts. Looks better now! To add more detail... Finished new rear parking and disc brake job Bled the brakes Going to have the 26" tires mounted up this week. Link to comment Share on other sites More sharing options...
soobie_newbie67 Posted May 9, 2011 Share Posted May 9, 2011 (edited) rebuilt that POS IHI RHB5 turbo, and put on some badass cross drilled and slotted rotors on the front and back with ceramic brake pads. Edited May 9, 2011 by soobie_newbie67 Link to comment Share on other sites More sharing options...
jboymechanic Posted May 9, 2011 Share Posted May 9, 2011 Replaced the Knock Sensor, old one was cooked, just a big melted mess. Link to comment Share on other sites More sharing options...
bigjimd Posted May 9, 2011 Share Posted May 9, 2011 Well yesterday actually. Daughter and I sprayed the whole engine area and underneath with engine cleaner took it to the carwash for a bath. Wow that stuff looks funny now that everything aint black. Went to the u pulit and finished shreading the 86 Loyale wagon. Tonight we start puling the motor for a rebuild and do an at to 5 speed swap. I think this is our first post here. Wait till you see her car. Pics to follow. Jim Link to comment Share on other sites More sharing options...
shane_h Posted May 10, 2011 Share Posted May 10, 2011 I did the unthinkable today - rebuild the Hitachi carb in my 86 gl wagon rather than swapping for a Weber! Now it runs beautifully and purrs at idle, a huge improvement over what it was doing. ... But then I went to pick up pizza <10 miles away, and when I got there, steam was billowing out from under the hood. Turns out I've got a tiny hole in one of the coolant hoses that comes out right under the thermostat housing, and when it's up to temp, the coolant really spurts out. I'll have to fix that once it cools off. :-\ Link to comment Share on other sites More sharing options...
92_rugby_subie Posted May 11, 2011 Share Posted May 11, 2011 Mine did that too just keep it topped up if you HAVE to drive it. I loved freaking people out at stop lights from Hillsboro to West Linn they were like "Omg your car is smoking, your engine is on fire!" and I just shook my head and pulled away, disappearing in a cloud of smoke... I mean steam haha Link to comment Share on other sites More sharing options...
1982gl4 Posted May 11, 2011 Share Posted May 11, 2011 Put a new fender on mine today, it looks good now! The paint matched really well considering it was a spray can (of the correct "pure white") Link to comment Share on other sites More sharing options...
shane_h Posted May 11, 2011 Share Posted May 11, 2011 Mine did that too just keep it topped up if you HAVE to drive it. I loved freaking people out at stop lights from Hillsboro to West Linn they were like "Omg your car is smoking, your engine is on fire!" and I just shook my head and pulled away, disappearing in a cloud of smoke... I mean steam haha Haha yeah, it was a pretty easy fix once I got a new hose, but it was fun getting some strange looks. Though out here, it's not that uncommon to see all kinds cars with stuff billowing out from under their hoods... People were more staring at the huge puddles of coolant I left everywhere I stopped. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now