bigo1966 Posted September 14, 2009 Share Posted September 14, 2009 I have a d/r tranny that i used to mock up my (falied) motorcycle engine conversion. I cut off the small extrusion that the pilot bearing rides on in the flywheel. So now i have a d/r tranny with no pilor bearing nipple. Its pretty much worthless right? Link to comment Share on other sites More sharing options...
The Beast I Drive Posted September 14, 2009 Share Posted September 14, 2009 If you would be willing to part it out, I could make it worth your while to send me the input shaft with the low range gears on it.... -Bill Link to comment Share on other sites More sharing options...
bigo1966 Posted September 14, 2009 Author Share Posted September 14, 2009 Even with the input shaft hacked 3/8 of an inch? Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted September 14, 2009 Share Posted September 14, 2009 I have a d/r tranny that i used to mock up my (falied) motorcycle engine conversion. I cut off the small extrusion that the pilot bearing rides on in the flywheel. So now i have a d/r tranny with no pilor bearing nipple. Its pretty much worthless right? find a bad one one made one good one out of it, I have 2 bad dual ranges in WA Link to comment Share on other sites More sharing options...
TeamCF Posted September 14, 2009 Share Posted September 14, 2009 What Scott said. If the rest of it is good and you find someone who needs the rest or part of the rest of it, it can still be a good parts donor. Link to comment Share on other sites More sharing options...
The Beast I Drive Posted September 15, 2009 Share Posted September 15, 2009 Yeah I just need the low gears, Im not actually going to use the shaft itself, but if I felt so inclined I could fix it and use it.... But I just want the 1.59 low gears to swap into a different tranny.... -Bill Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now